Concrete Saw, Wet Saw, Tile Cutter, Cement Mixers

Unique Hoodia Weight Loss

2009-06-04T22:30:00.000-07:00

Unique Hoodia Weight Loss: "Unique Hoodia Weight Loss Diet Pills"

5957 #8 X 1-3/4in Wood/Subflooring Screws, Quick Drive - Power Tools

2009-05-02T10:18:00.001-07:00

5957 #8 X 1-3/4in Wood/Subflooring Screws, Quick Drive
General Tools > Power Tools > Quick Drive

#8 x 1-1/4" Under-layment screws.

Hi-lo thread, sharp point, modified trim head w/nibs, grey phosphate finish.

2500 screws per box.

5958 Quick Drive QDPRO200G2 Underlayment Pro Series Auto-Feed Tool
General Tools > Power Tools > Quick Drive

Required to drive under-layment and sub-floor screws.

For use with the Quick-Drive fastening tool.

Sub-flooring to wood or steel

Wall plates, stair treads, sheathing

Decks and docks

Fiber cement siding-to-steel

For use with any Quik Drive G2-equipped screw-gun

5962 Racatac Repl Liners
Tile & Stone Tools > More Tile & Stone Tools > Kneepads & Gloves

Racatac Repl Liners 2 pcs

5964 10in Diamond Hand File 1/2 Round
Tile & Stone Tools > More Tile & Stone Tools > Other Tile & Stone Tools

10" Diamond Hand File 1/2 Round

Use on granite, porcelain, marble, etc

5965 Dual 4in Suction Cup
Tile & Stone Tools > More Tile & Stone Tools > Other Tile & Stone Tools

Dual suction cup for lifting large tile and stone.

Suction cupâ€™s load capacity decreases when used on rough surfaces.

5952 RAC-A-TAC With 2in Casters - Kneepads & Gloves

2009-05-02T10:17:00.003-07:00

5952 RAC-A-TAC With 2in Casters
Tile & Stone Tools > More Tile & Stone Tools > Kneepads & Gloves

Racatac With 2" Casters

Speed & comfort for a demanding job.
Comfortable web spring seat.
Adjusts from 11.5" to 15.5" high.
Made in the USA.
Thick foam inner knee pads for all day comfort.
2" polyurethane ball bearing casters.
Weighs 8 lbs, load capacity 300 lbs.
The 2â€ caster model would be your choice if you prefer to be closer to the floor or if you will be using it in mostly flat-work applications in kneeling/leaning over positions, such as tile setting, various floor installations, sealing, grouting, staining, etc.

Features:

ADJUSTABLE SEAT â€“ Instead of sitting back on your heels, the fully adjustable seat provides the upper body support, leaving your feet free to control your movement.
KNEEPADS â€“ Comfortable attached floating-like kneepads allow your knees to rest and move freely. They eliminate direct knee to floor pressure, circulation problems, and will allow you to work in shorts without having to wear kneepads with straps.
CASTERS â€“ Allow you to roll to move, instead of crawling and bouncing on your knees. Elevates your body and eliminates the normal pressure on toes, ankles and knees. Will allow you to work over dirty, wet, or dusty areas easier and cleaner.
TOOL TRAY â€“ This feature is really appreciated by all the people that use the Racatac. They love having a place to keep their necessities right there rolling with them.

5953 Quik Drive Fastening Kit PROLDHG2M25K
General Tools > Power Tools > Quick Drive

5953 Quik Drive Fastening Kit PROLDHG2M25K

The leading automatic driving system.
Now, fastening under-layment, fiber cement board and sub-flooring is fast and easy.
You can easily drive screws to a consistent depth and avoid the time and aggravation of handling individual fasteners.
Quick-Drive is a heavy duty tool, engineered for long life and solid action.
It is easy to load, each screw strip holds 23 or 31 screws, depending on type.
Remove extension for use in small spaces.
Kit includes: Pro Series Auto-Feed Tool for backerboard screws, Makita 6.5 Amp, 2500 RPM drive motor, Pro Extension, Quiver and Pro Tool bag.

5954 #10 X 1-3/4in Backerboard Screws, Quik Drive
General Tools > Power Tools > Quick Drive

#10 x 1-3/4" #3 square recess, flared head w/nibs for use with Quickdrive.

Use for Hardibacker backerboard.

1500 screws per box.

Bugle head / QuikGuard coating

23 screws per strip

5955 #10 X 1-1/2in Backerboard Screws, Quik Drive
General Tools > Power Tools > Quick Drive

#10 x 1-1/2" #3 square recess, flared head w/nibs.

Use for HARDIBACKER backerboard.

1500 screws per box.

Bugle head / QuikGuard coating

23 screws per strip

5956 #7 X 1-1/4in Underlayment Screws, Quick Drive
General Tools > Power Tools > Quick Drive

#7 X 1-1/4in Underlayment Screws, Quick Drive

#7 x 1-1/4" Under-layment screws.
Hi-lo thread, sharp point, modified trim head w/nibs, grey phosphate finish.
2500 screws per box.
Under-layment Pro Series Auto-Feed Tool (item 5958) Required to drive these screws with Quick Drive item 5953.

5921 MK-101 Tile Saw On/Off Switch - Tile & Stone Saw Accessories

2009-05-02T10:17:00.001-07:00

5921 MK-101 Tile Saw On/Off Switch
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK-101 Tile Saw On/Off Switch

On/Off Switch for the MK-100, MK-100JCS, MK-101, MK-101JCS Tile Saws

5925K MK-100 Wet Tile Saw Kit W/Stand
Tile & Stone Tools > Tile Saws & Stone Saws > 20in to 25in Tile Saws

MK-100 Tile Wet Saw Kit Features

Entry level professional quality saw

Free 10" MK diamond blade, stand, water pump, rip guide, dressing stone, adjustable protractor, & dual angle guide
MK-100 Wet Saw General Information

Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
Two position motor post cutting head for convenient cutting of various tile sizes
Built-in water distribution system supplies water to both sides of blade
Variable height cutting head allows for plunge cutting and use of blades smaller that 10" diameter
Blade guard accommodates 6"' and 8" profile wheels
Micro V-belt drive
Linear-Bearing and chrome plated guide-bar assembly ensure precise cutting
Blade shaft lock for easy blade removal
One-piece reinforced zinc-plated steel frame

5933 Alpha AWS-110 Electric Saw
Shop by Brand > Alpha > Other Alpha Tools

Alpha AWS-110 Electric Saw

Water feed system included.
4-1/2", powerful 11 Amp motor. 20 mm Arbor.
Using the guide provided you can work on the edge of the stone.
Place a straight-edge on the stone and guide against it, or the AWS-110 can be used free hand like any other circular saw.
For safety in-line Ground fault interrupter is included.

Versatile Wet Stone Cutter for Tile Contractors

Ideal for those working with natural and engineered stone, tile, concrete, masonry and glass.
It was designed to produce straight and true cuts as required by professional fabricators and installers.
Equipped with one of the most powerful motors in its class, the AWS-110 has the strength to power through hard dense materials, such as, porcelain, hard red granites and engineered stone.
The water-feed supply eliminates the harmful dust particles common in dry cutting applications.
The included self-stick felt strips can be applied to the base plate to protect the work surface from scratches. The AWS-110 may be used several ways.
The reversible ruler guide down, one can work off the edge of the stone; in the up position, it can glide along a straight edge.
Of course, it may be used free hand and either wet or dry.
Additionally, utilizing the optional Carriage Assembly, one can use the AlphaÂ® Guide Rail System to perform machine precision cuts.
You can easily transition to polishing with the AlphaÂ® WS120 polisher and Ceramica pads.
The AWS-110 is more than a saw; it is a complete cutting system that can be used for cutting, scoring, profiling and more designed and manufactured with the highest quality standards, as are all Alpha Professional ToolsÂ® products.

5935 MK-1503S Wet Stone Polisher Kit
Tile & Stone Tools > Polishing & Profiling Equipment > Polishers, Sanders, & Profiling Equipment

MK-1503S Wet Stone Polisher Kit

Weight 6 lbs, 3500 Rpm, 115 Volts, 5.3 Amps. motor
Locking on/off switch.
Spindle thread 5/8"-11.
Durable universal motor operates on standard house current.
Improved water feed orifice for better water distribution.
Kit Includes: Free plastic Carrying case, water feed, 8 diamond polishing pads, hook and loop backer pad, & G.F.I

5937 MK-1503S Stone Wet Polisher
Tile & Stone Tools > Polishing & Profiling Equipment > Polishers, Sanders, & Profiling Equipment

MK-1503S Stone Wet Polisher

Ideal for hand held grinding and polishing of gemstones, rock materials, marble and granite
The hand held grinder easily attaches to a standard hose to enable the unit to dispense a steady flow of water through a control valve to the work piece
Weight 6 lbs, 3500 Rpm, 115 Volts, 5.3 Amps. motor
Locking on/off switch.
Spindle thread 5/8"-11.
Includes a water hose, GFCI , and spanner wrenches
Durable universal motor operates on standard house current
Compact tool with ergonomically designed sure-grip handle
Lightweight water attachment with adjustable valve
Includes Ground Fault Circuit Interrupter

5849 MK Wet Tile Saw Replacement Motor - Tile & Stone Saw Accessories

2009-05-02T10:16:00.005-07:00

5849 MK Wet Tile Saw Replacement Motor
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK Wet Tile Saw Replacement Motor

Original replacement motor for MK-270, MK-370, MK-470, MK-370EXP, MK-770, MK-770EXP tile saws.
1-1/4 hp, 7.4 Amps, 6000 Rpm.

5855 Poly V-Belt for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Poly V-Belt for Husqvarna, Target, & Felker Tile Saws

6-groove poly V-Belt for Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.
V-Belt also available for older tile saws.
Call (800) 709-0002 for special orders.

5876 Adjustable Hole Saw Guide
Tile & Stone Tools > Drilling Tile & Stone > Guides & Accessories

Adjustable Hole Saw Guide

This adjustable drill guide is a great tool for securing your hole-saw into position.
Quick release vacuum lock handle.
Ensures accuracy and eliminates costly surface damage due to "drifting."
Strong 4â€ suction cup, holds drill in place.
1/4â€, 5/16â€, 1/2â€, 3/8â€ drill bit hole guide.
Adjustable hole saw guide up to 1//4" to 3-3/8â€ (6mm-83mm).
Using water extends life of all hole-saws bits.

5878 Felker Water Ring Set
Tile & Stone Tools > Drilling Tile & Stone > Guides & Accessories

Felker Water Ring Set

Small ring for faucet opening holes up to 1-1/2". Large ring for sink opening holes up 3".
Instantly creates a water dam to cool core bits while drilling holes.
Made of pliable rubber with special lip that creates a suction.
Can be used again and again.
Works on smooth surfaces, such as granite, marble and tile.
Set consists of one each 1-1/2" & 3".

5917 Quad Adapter for Fury Turbo Blades 7/8in
Tile & Stone Tools > Tile & Stone Diamond Blades > Dry Diamond Blades For Porcelain & Granite

Quad Adapter for Fury Turbo Blades

Flush mount adapter.
For use with Fury Turbo Blades only, (7/8" arbor)
These adapters attach easily to our Fury Turbo blades and provide a fast and easy solution to your flush cutting needs
7/8" to 5/8-11, 4 screws included

5839 Imer Combicut 250VA Wet Saw - Imer Stone & Tile Saws

2009-05-02T10:16:00.003-07:00

5839 Imer Combicut 250VA Wet Saw
Shop by Brand > Imer > Imer Stone & Tile Saws

Imer Combi 250VA Tile & Stone Saw
All New Combi lighter, & able to plunge cut!

Free Shipping
1.5 hp motor, 115V, blade speed 2800 Rpm this saw has hi-torque at low Rpm to deliver fast, chip free, cutting performance.
Rip cut 31", diagonally cuts 22"x 22" tile
45 degree miter cuts, just tilt the cutting head
Adjustable cutting head makes plunge cuts and L cuts a snap
10" blade capacity, 5/8" arbor with 2-1/2"(90 degrees) and 1-1/4"(45 degrees)
The stand and side table are very light yet stable and strong.
Cast aluminum make for a rigid and light weight saw at 70 lbs and the all new cast aluminum protractor is truly and accurate rip guide.
Free folding stand, side table and diamond blade included.

IMER'S MESSAGE
"Today's tile and stone pieces are larger and more expensive than in years past. Consequently, architects and their clients want the pieces set very close together for that striking "slab look." This requires accurate, chip free cutting performance. The Combi 250VA delivers this performance for the most demanding installations, day after day. GUARANTEED!"

Mace T. Coleman Jr.
President IMER U.S.A.

5840 Barwalt Grout Scraper
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Barwalt Grout Scraper

For removing unwanted grout, mortar, thinset, calcium, caulking and surface rust
Durable carbide tips are reversible, providing six scraping edges for longer tool life
One Diamond shape carbide tip & one triangle shape carbide tip

5841 Barwalt Spacer Chaser
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Barwalt Spacer Chaser

Barwalt Spacer Chaser has a hook to get any size spacer out!

This spacer removal tool has an exclusive fulcrum action that allows for quick spacer removal without damaging the tile before grouting.

5842 Alpha 6in Marble Profile Wheel
Shop by Brand > Alpha > Alpha Profilers & Cup Wheels

6" Wet Cutting Marble Profile Wheel

Profile and cut marble in one pass.
5/8" arbor, fits on most wet saws
6" dia. 3/8" Radius wheel. For marble only
You can finish your marble edges with the Alpha PVA system item 2021
Unlike most profile wheels that only perform the profile action.
6â€ wheel fits tub and tile saws, has been a popular item with tile installers for years.
They have found it to be the ideal tool for cutting and profiling tile baseboards.
The long life and smooth cutting action are two other reasons for its popularity.
High quality diamonds and matrix best suited for wet cutting marble and agglomerated marble tile.
Use the AlphaÂ® Marble Profile Wheel to cut and profile in one pass to save time, money and reduce waste.

5844 QEP Roberts 10-47 6-3/16 in. Jamby Repl. Blade
Tile & Stone Tools > Jamb Saws & Toe Kick Saws > Jamb Saw Blades

QEP Roberts 10-47 6-3/16" Jamby Repl. Blade.

Use with the QEP Roberts 10-46 6" Jamby Jamb Saw

58301 Levelite Accusquare Pro - Spectra Precision Laser

2009-05-02T10:16:00.001-07:00

58301 Levelite Accusquare Pro
Shop by Brand > Spectra Precision Laser

Levelite Accusquare Pro

Generates two lines on the floor at a precise 90 degree angle with speed and accuracy.
One-person operation, eliminates messy chalk lines.
Working range: 50 to 100 ft (depending on ambient conditions).
Water, mud and shock resistant.
Comes with plastic carrying case & laser glasses.
Weight 7.5 lbs.
Size (LxWxH) 14" x 12" x 8"
Working Range 50' nominal, 100' depending on ambient conditions
Accuracy 1/4" @ 75'
Battery Type 2 x C batteries

5832 IMER Mini-Mix 60 Mixer
Concrete & Masonry Tools > Concrete & Mortar Mixers > Portable Mortar Mixers

IMER Mini-Mix 60 Mixer

Free 2 buckets & 2 mixing paddles included.
Free shipping from IMER factory warehouse.
Truly versatile mixing machine.
Quickly and thoroughly mix mortar, stucco, thin set, dry pack mortar, epoxy and plaster.
Not recommended for concrete.
While one batch is being mixed, the other is being applied.
Bucket capacity 14 gal
Batch output: 12 gal / 60 lb. bag
Drum diameter 24", blade speed 55 RPM.
Machine weight 64 lbs.
1/2 hp, 115 Volts direct drive motor and gearbox assembly is very quiet, and very powerful.
Operate the Mini-Mix anywhere with no complaints

Dimensions 25"L x 23"W x 31"H.

Project-Mixing	Imer Product Application
Mixing Concrete (small batch-250lbs or less)	Minuteman or Wheelman
Mixing Concrete (large batch 400-800lbs)	Workman 250 or 350
Stucco (small batch-1 bag 80lbs or less)	Mini Mix 60
Stucco (medium batch-2 bag 80lbs)	Mortarman 120
Stucco (large batch 400lbs or more)	Workman 250 and 350
Mortar (small batch 80lbs or less)	Mini Mix 60
Mortar (small batch 160lbs-270lbs)	Mortarman 120 or Minuteman
Mortar (large batch 400lbs-800lbs)	Workman 250 or 350

58335 Felker TM-75 Tile Saw Stand
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Not Available until April

Felker TM-75 Tile Saw Stand

5835 Tavy Tile Puck
Tile & Stone Tools > More Tile & Stone Tools > Other Tile & Stone Tools

Makes accurate setting of marble quicker and easier!

The Tile Puck can be used for any number of leveling applications.

Showers seats, counter tops, Kitchen appliances, Machine, you name it.

Made of non-marking polyethylene plastic, measures only 5" in diameter, 1" thick and weights 10 ounces.

To detect lippage, slide the Tavy Tile Puck and listen.

For leveling, place the Tavy Tile Puck and get an instant reading.

Helpful Hints:

Armen Tavy Says... My Tile Puck is placed on the first piece of tile or stone and allows you to level this first piece easily in one operation. This process is repeated over the next row of tiles and then the Puck can be moved across these tiles that are set to check for any high spots.

The 10 ounce weight of my Puck creates a definite clicking sound as high spots are found, which allows the tile setter to make necessary corrections before it's too late.

5837 Imer Combicut 200VA Wet Saw
Tile & Stone Tools > Tile Saws & Stone Saws > 20in to 25in Tile Saws

All New Combi lighter, & able to plunge cut! Most popular saw in it's class.

Free Shipping
Free folding stand, side cutting table and porcelain blade included
Manufactured using the latest die cast aluminum fusion technology
Light weight! Only 45 lbs
Rip cut 24", diagonally cuts 16"x 16" tile
Adjustable cutting head makes plunge cuts and L cuts a snap
45 degree miter cuts, just tilt the cutting head
8" blade capacity, 5/8" arbor
1HP motor, 115V, blade speed 2800 Rpm

IMER'S MESSAGE
"The COMBI 200VA from IMER U.S.A., is the most accurate lightweight tile saw made today. Designed and built to last, the COMBI 200VA is equally at home in the hands of the professional installer or the first time user".

Mace T. Coleman Jr.
President IMER U.S.A.

5805 Roberts by QEP 4-1/2in Jamby Jamb Saw - amb Saws & Toe Kick Saws

2009-05-02T10:15:00.003-07:00

5805 Roberts by QEP 4-1/2in Jamby Jamb Saw
Tile & Stone Tools > Jamb Saws & Toe Kick Saws > Jamb Saws & Toe Kick Saws

QEP 4-1/2'' Jamby Jamb Saw

Cuts inside corners .
Precise height adjustment from 3/16" to 1-1/8".
Powerful 5.8 Amp industrial grinder power unit.
Free 4-1/2" carbide tip blade & carrying case.

5806 4-1/2in QEP Jamby Repl. Blade
Tile & Stone Tools > Jamb Saws & Toe Kick Saws > Jamb Saw Blades

4-1/2" carbide blade.

Use with 4-1/2" jamby jamb saw

5819 Roberts by QEP 6in Jamb Saw 10-46
Tile & Stone Tools > Jamb Saws & Toe Kick Saws > Jamb Saws & Toe Kick Saws

QEP 6" Jamb Saw

6" blade, 7.5 Amp.
Precise height adjustment from 3/16" to 1-1/8".
For undercutting wood door jambs and wood cove base.
Cuts inside corners and under toe kicks.
All ball or needle bearings.
Spiral ground gears for smooth, quiet operation.
Easy grip handle for maximum control.

5824 QEP 60024 Professional Wet Saw & Stand
Tile & Stone Tools > Tile Saws & Stone Saws > 20in to 25in Tile Saws

QEP 60024 24" Wet Saw Features

Free shipping from Q.E.P warehouse to a commercial address in the continental USA
Rip cuts 24" tile, diagonally cuts 17" x 17" tile
Plastic shaft bearing housing can overheat when cutting porcelain. We do not recommend this saw for intensive Porcelain tile cutting, using a good quality porcelain blade will extend the life of the bearings.
Rustproof, removable plastic water tray for easy cleaning
One year warranty

Accessories

Heavy-duty stand with rear locking wheels
High volume water pump
10" continuous rim wet diamond blade
Side and front extension tables
Miter block guide & rip guide

5825 Makita 9554NB 4-1/2'' Angle Grinder
General Tools > Power Tools > Angle Grinders

Makita 9554NB 4-1/2'' Angle Grinder

Switch is located on top of motor housing.
Small circumference barrel grip for easy handling.
Labyrinth construction seals motor and bearings.
Spindle lock for easy wheel changes.
Double insulated.
Included 4-1/2" grinding wheel.
5 Amps, 11,0000 Rpm. Weight 3.1 lbs.
Exclusive labyrinth construction that seals the motor and bearings from contamination.
The 9554NB features a switch that is conveniently located on the top of the motor housing; a small circumference barrel grip for easy handling, a high power-to-weight ratio and a double insulated motor.
A spindle lock makes for easy wheel changes and the side handle can be installed on either side of tool.

5780 Roller Knee Pads - Shop by Brand > Bucket Dolly

2009-05-02T10:15:00.001-07:00

5780 Roller Knee Pads
Shop by Brand > Bucket Dolly

Roller Knee Pads

Increase your productivity. Industrial knee cushions.
Heavy duty swivel casters, double ball bearing rubber wheels will not scratch tiles.
Light weight, easy to clean.
Replaceable pads

5781 Repl. Liners, Roller Knee Pads
Shop by Brand > Bucket Dolly

Original Replacement liners for Roller Knee Pads.

Liners needs to be glued on.

5783 SL24 Laser Square
General Tools > Lasers > Lasers

SL24 Laser Square.

The SL-24 is the world's first line producing square and level line laser tool. The compact size and easy set up make it one of the most innovative tools available today.

For centuries, man has been content with the simple carpenter's square and only in the last 100 years has he improved on it with the addition of measurements on the two sides. Dot lasers were introduced into the construction industry about 20 years ago, but it took most contractors in the acoustical ceiling industry almost 10 years to realize the tremendous savings that they offered even at costs of $3,000 to $5,000! Years of design changes and the advent of the diode laser have brought the cost down to an affordable range that the individual professional can afford.

The SL-24 is not the same type of alignment system and when it comes to square lines, itâ€™s the only product on the market today. But when it comes to labor savings and improvement of quality...it is a product that cannot be overlooked.
The fact that many contractors, carpenters, flooring mechanics, brick layers, concrete contractors, or virtually anyone who uses a 90Â° set-up in their work, can save thousands in labor set-up while improving quality makes the SL-24 the tool of the 21st century.
Layout floors, including diagonals, establish pitches, align wall tile, check floors for level & flatness, etc.
90 degree squaring with 2 lines not dots. 2 level lines not dots for horizontal alignment.
Long distance dots individually level able at 90 degrees to each other.
Built-in rechargeable Ni-cad battery saves hundreds per year in battery cost.
Fits on standard tripods. Laser glasses for use in bright light conditions included.
Most powerful laser beam available with convenient belt carrying case.
Most compact multi-beam laser, 4"x4"x2".

Technical Features:

Flooring layouts (90Â° & 45Â°) tile, wood, & stone, vinyl & carpet
For shorter distances the 2 lines at 45Â° & 90Â° are the choice for tile, wood and VCT. Projecting upwards of 40 feet in either direction, the lines can be troweled through because they appear on top of the mortar or adhesive.
The dots will travel up to 600 feet and can hit the floor at both ends using the adjustment knobs then snap back to the hash marks on the laser for a perfect 90Â° or 45Â°. Layout times can be cut 60-90% over conventional methods.
The center leg can be removed to set up on the exact corner of the tile
Cutting wood end boards at 90Â° or 45Â° eliminates the loss of you snap line under saw dust.(eliminates the problem of losing the snap line under a pile of saw dust since the laser will project over the top of it).
Only one direction of grid lines needs to be snapped and then hash marked with the grid. Move the laser for each grid row and trowel through (past) the line.
Cutting Carpet most dealers add 3 or more inches to each cut and at $6 or $7 per yard. At 15 cuts a day this equals the cost of a brand new cutting machine each year!
Put the line or dot down the salvage edge and cut across the other line. The dot mode can be used if the distance and wrinkling carpet are a factor. Just hit the stand up cutter when cutting across the width. This gives a perfect 90Â° cut every time, with much less waste. Square remnants and rugs the same way!
Pattern matching (carpet) Know if the match is either bowed or skewed too much. Using the laser on a pattern hit the target further down the salvage edge. Shoot across the width to the target on the other side to check skew; then slide the target to the middle to check bow.
Estimate floor conditions (Square) Simply set the laser in the corner of a room and adjust knobs to project 2 lines, one off of each wall, and it will be obvious to the customer and you if the room is out-of-square, and if so, by how much.
Select the customer's "favorite" wall and note it to be the starting "net" wall. Then check for out-of-flat and note which condition needs attention. Assuring the customer that each of the 2 problems will be corrected really hits home when the next bidder misses both of these conditions.
You can be 5-10% higher in your bids and still get the job, because you know what has to be done, especially when the other bidder simply says, "It looks ok," or "We should be ok." This means instant sales here for you!
Slopes to a drain position the laser over the drain, level the vials and hit the target at the end of the room or pan which will be filled with mortar. Adjust the level line on the target to a point equaling the desired slope to the drain. Then position the screed near the laser and the height desired at the drain. Draw a parallel line in the screed and then apply the mortar and screed away from the laser keeping the red line on the screed line. This automatically guaranties the desired pitch (from level).
Floor conditions (out-of-flat) simply shoot the horizontal lines at the target center on both sides. Move the target around the room to detect the exact amount that needs to be filled or ground. Depth nails are provided to clip off in the low spot that will act as a dip-stick for self-leveling products and the tip of the screed can rest on the pin while screeding in a circle around the pin.
Floor conditions (out-of-level) Use the same process as above but adjust both levels to center vial and the target will tell you whether to grind or fill. If you prefer not to grind, move the laser to an obvious high spot which will indicate where to fill the floor. Again, use the leveling pins for accuracy. Although most floor specs are listed as out-of-flat occasionally, out-of-level is necessary.

5792 Pearl Tile Saw Stand VX 10.2XL
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Pearl VX10.2XL PRO Tile Saw Stand

Stand included with purchase of new VX.10.2XL tile saw

5795 Barwalt Ultra Grout Cleaning System
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Barwalt Ultra Grout Cleaning System

Ultra Grouting System will cut your grouting time by 30-50% and you will never squeeze a sponge again.

Large bucket with 3 rollers.
Kit include two ultra-comfortable cushioned grip handles with grout sponges, one for walls & the other for floors.
New Added bonus; abrasive & non abrasive scrub pads supplied at no extra charge.
Sponges attach with hook & loop fastening system
When grouting, just pump the sponge on the grill into the bucket and roll the sponge over the rollers, then start cleaning the grout.
The slits in the sponge trap more grouting materials than a conventional sponge and the grating in the larger bucket allows it to rinse clean.
This process will tool the joints. To clean the tile, dip and roll the sponge clean and drag the sponge flat but diagonally this time, across the tile and you are finished! You will be amazed how clean the floor will be and you have eliminated any haze as well.

5711 Pearl VX10.2XL PRO Tile Saw & Stand - 20in to 25in Tile Saws

2009-05-02T10:14:00.005-07:00

5711 Pearl VX10.2XL PRO Tile Saw & Stand
Tile & Stone Tools > Tile Saws & Stone Saws > 20in to 25in Tile Saws

Pearl VX10.2XL Pro Wet Tile Saw & Stand

Free stand and diamond blade.

Features

Compact professional quality saw that cuts larger format tiles
Stainless Steel water pan
Heavy duty Belt driven 2 hp motor, 115 volts.
Industrial ball bearing rollers ensure smooth, precise cart movement
Liquid cooled shaft bearing housing!
Weighs only 83 lbs.
Compact design only 23" long fits in trunk of car.
Rips: 24", diagonally cuts 18" x 18" tile.
Telescopic cutting table.
Saw dimensions 23"L x 22-1/2"W x 19"H.
Inlcudes: Diamond blade, blade wrench, 45/90 rip guide, tub, drip tray, water pump, miter block, product manual, warranty card.

5712 Pearl VX10RS 10in Rail Saw
Shop by Brand > Pearl Abrasive > Pearl Tile Saws, Stone Saws, Masonry Saws, & Accessories

Pearl VX10RS Rail Saw

Free Shipping from Pearl factory warehouse to a commercial address in the lower 48 states.

Free table extension & Pearl DTLHPXL 10" porcelain blade

Features

Compact professional quality saw that cuts larger format tiles
Plunge cutting head
Heavy duty direct drive 1.5 hp motor, 115 Volts.
Removable extension table
Weighs 145 lbs.
Sturdy wheels for easy transportation
Rips: 37", diagonally cuts 26" tile.
Depth of cut 2-5/8"
10" blade capacity 5/8" arbor.
Inlcudes: Slide in legs with wheels, 10" Premium blade, multiple wrench, 45/90 rip guide, water pump, water level tube, table extension and drain plug.

5715 DTL6B19A 6'' Pearl Professional Diamond Blade
Tile & Stone Tools > Tile & Stone Diamond Blades > Wet Diamond Blades For Tile & Marble

Buy a DTL6B19A 6'' Pearl Professional Diamond Blade and Save DTL6B19A 6'' Pearl Professional Diamond Blade

DTL6B19A 6'' Pearl Professional Diamond Blade 7/8'' arbor
Cut marble, soft stone, & ceramic tile.

5726 Pearl DTL06HPA 6in Porcelain Blade
Tile & Stone Tools > Tile & Stone Diamond Blades > Wet Diamond Blades For Porcelain & Granite

Pearl 6" DTL06HPA Porcelain Diamond Blade, 7/8" Arbor

5775 Pump for MK-270, MK-370, & MK-470 Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Pump for MK-270, MK-370, & MK-470 Tile Saw

MK Pump for the MK-270, MK-370, MK-470 tile saws.

5602 Quickcut Saw Replacement Blade - Other Barwalt Tiling Tools

2009-05-02T10:14:00.003-07:00

5602 Quickcut Saw Replacement Blade
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Quickcut Saw Replacement Blade

Replacement Quickcut DoorJamb Saw Blade

5603 Marshalltown Durasoft Manual Doorjamb Saw
Tile & Stone Tools > Jamb Saws & Toe Kick Saws > Jamb Saws & Toe Kick Saws

Marshalltown Durasoft Manual Doorjamb Saw

Resilient Durasoft handle provides a soft feel, reduces fatigue and offers excellent durability.
Specially shaped 12" long blade permits right or left hand cutting
Cut door jambs with ease

5690 MK-145 Benchtop Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > 13in to 19in Tile Saws

MK-145 Tile Saw Features

High torque 1/2 HP, 4 AMP, 5,500 RPM motor
Weighs 12 lbs
Dimensions: 17.5" x 16" x 7".
Free 4-1/2" MK-200 diamond blade, adjustable rip guide, 45Âº rip guide, & table stop
Light weight and compact wet cutting tile & marble saw
Powerful high-torque universal motor
Cuts large size ceramic and stone tiles
Will cut tiles up to 1" thick
Built-in 45Âº miter table
Easy alignment precision rip guide
45Âº rip guide for diagonal cuts
MK-Safeswitchâ„¢ prevents saw from being operated when locking key is removed
Internal cord storage
Detachable table stop prevents saw from moving away from operator when in use
One-year limited warranty

5693 MK-145 Repl Diamond Blade 4-1/2in
Tile & Stone Tools > Tile & Stone Diamond Blades > Wet Diamond Blades For Tile & Marble

Replacement Blade, MK-145 Tile Saw

4-1/2" diameter 5/8" - 7/8" arbor

5694 Barranca MK-70 4'' Dry Tile Cutter w/ 2 Blades & Case
Tile & Stone Tools > Tile Saws & Stone Saws > Hand Held Saws

Barranca MK-70 4'' Dry Tile Cutter w/ 2 Blades & Case

11,000 RPM, weight 8 lbs. 20mm (3/4") arbor. 9 amp.
Ergonomically designed grip.
Convenient storage case included.
Makes bevel cuts from 0 to 45 degrees.
Free storage case, 4" dry continuous & turbo blades

5500 Bucket Dolly - Shop by Brand > Bucket Dolly

2009-05-02T10:14:00.001-07:00

5500 Bucket Dolly
Shop by Brand > Bucket Dolly

Bucket Dolly

Fits all 5 & 3-1/2 gal buckets.
Will hold a bucket on a 45 degree angle.
Sturdy & stable 150 lbs capacity, 5 casters.
Quantity discount buy 3 Pay only $28.99 each.

5507 Montolit Masterpiuma Titanium Repl. Wheel
Shop by Brand > Montolit

Montolit Masterpiuma Titanium Repl. Wheel 243T

Long lasting 7/8" Titanium cutting wheel

5595 A-Square 3'X4'X5' Layout Tool
Shop by Brand > A-Square

A-Square 3'X4'X5' Layout Tool

Folding 3 ft x 4 ft x 5 ft layout triangle.
Easier - Faster - More Accurate
Saves time & money by making it possible for one man to perform the task of two
Made of aircraft grade anodized aluminum.
Built to withstand rugged handling, Easy to clean, Won't rust.

5597 A-Square 4'X4' 45 Degree Layout Tool
Shop by Brand > A-Square

A-Square 4'X4' 45 Degree Layout Tool

The ONLY Folding 4' x 4' x 45 degree layout triangle.
Easier - Faster - More Accurate
Saves time & money by making it possible for one man to perform the task of two
Made of aircraft grade anodized aluminum.
Built to withstand rugged handling, Easy to clean, Won't rust.

5601 Barwalt Manual Doorjamb Saw
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Manual Doorjamb Saw

Manual doorjamb saw.
Includes Quickcut saw blade
Cut door jambs with ease

5340 Makita 9527PB 4-1/2in Angle Grinder W/ Paddle - Angle Grinders

2009-05-02T10:13:00.003-07:00

5340 Makita 9527PB 4-1/2in Angle Grinder W/ Paddle
General Tools > Power Tools > Angle Grinders

Makita 9527PB 4-1/2" Angle Grinder W/ Paddle

Extra large paddle switch for easy operation.
Heavy-duty 6.4 Amp, 10,000 Rpm
Weight 3.9 lbs. with 5/8"-11 spindle thread.
Labyrinth construction seals motor & bearings.
Small circumference barrel grip for easy handling.

5345 Makita Cordless Concrete Vibrator VR251DWDE
Concrete & Masonry Tools > Concrete Vibrators

Makita Cordless Vibrator VR251DWDE

Vibrates at 12,500 VPM for smooth mixing of concrete
Produces a consistent finish on concrete footings, walls, stairs
Increases strength of concrete
46-7/8" flexible shaft, weight 7lbs (w/Battery)
1" vibrator diameter.
Weight only 7 lbs.
Protective cover on switch and battery to prevent contamination

INCLUDES:

2 - 12 Volt Batteries
Battery Charger DC1411
Battery cover
Carrying Case.

5350 Makita PC1100 Concrete Planer
Concrete & Masonry Tools > Surface Preparation Tools > Surface Grinders

PC1100 Concrete planner.

This concrete planer gives you smooth finishes on concrete surfaces and levels concrete seams with precision.
It features a dry cutting diamond wheel for planing without a water feeding system.
Adjust planning-depth quickly with the front roller. Keep surfaces clean with the handy dust bag on this tool.
Double insulated for longer tool life.
Includes dry cutting diamond wheel for planning without a water feed system.
8.5 Amp motor, 10,000 RPM
Wheel diameter 4-3/8in, 5/8-11 spindle.
Front roller adjust planning depth.
Dust bag for clean operation.
Lock-on button for continuous operation.
Steel tool case included.

5400 Alpha 4in Coarse Continuous Cup Wheel
Shop by Brand > Alpha > Alpha Profilers & Cup Wheels

DS Style Grinding Wheels The Best Shaping Wheel for Natural and Eng. Stone

Perfect for lightweight grinding and shaping work on marbles and granites.
Available in a 4â€ size with a coarse grit, AlphaÂ® DS Style grinding wheels fit on most common angle grinders and wet polishers.
Fabricators will love its soft touch when it comes to shaping delicate edges on marble and granite.
Tile installers will enjoy the fantastic results they can achieve with little or no operator fatigue.
Perfect grinding wheel for shaping the bullnose on marble and granite.
Aggressive enough to shape curved areas, ideal for work on softer stones such as Bottichino Marble without fear of removing too much material.
Exclusive no-bounce feature, reduce operator fatigue and improves control while providing fast stock removal
Max 14,500 Rpm, 5/8"-11 threaded arbor
Can be used wet or dry at low or high speed
Versatile and long lasting, AlphaÂ® DS Style grinding wheels are the premium choice for any grinding or shaping work.

5431 3inx20mm Alpha Marble Profile Wheel
Shop by Brand > Alpha > Alpha Profilers & Cup Wheels

3" Wet Cutting Marble Profile Wheel

Unique & convenient blade for cutting and profiling 3/8" marble tile in one pass
Fits our AWS-110 Wet Circular Saw, providing a portable solution to cutting and profiling marble tiles.
Use wet only!
With the introduction of the AWS-110 Wet Stone Cutter, AlphaÂ® recognized an opportunity to create a more portable solution for transport to the job site and created the 3â€ wheel.
The 3â€ size allows for better positioning of the saw handle, which leads to improved performance by reducing operator fatigue.
High quality diamonds and matrix best suited for wet cutting marble and agglomerated marble tile.
Use the AlphaÂ® Marble Profile Wheel to cut and profile in one pass to save time, money and reduce waste.

5307 Folding stand for MK-270, MK-370, & MK-470 Tile Saw - Tile & Stone Saw Accessories

2009-05-02T10:13:00.001-07:00

5307 Folding stand for MK-270, MK-370, & MK-470 Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Folding stand for MK-270, MK-370, & MK-470 Tile Saws only.

Will not fit MK-370EXP models

5310 MK-10S Segmented Diamond Blade
Concrete & Masonry Tools > Diamond Blades > Masonry Diamond Blades

Segmented diamond blade to cut hard brick

Use wet only with your belt driven 1.5 hp wet saw

10" diameter, 5/8" arbor

5336 Marshalltown 1/4in X 1/4in Square Notch Margin Trowel
Tile & Stone Tools > More Tile & Stone Tools > Trowels

Marshalltown 1/4" X 1/4" Square Notch Margin Trowel

1/4"x1/4" square notch margin trowel 5" x 2".
Forged high grade steel.
Made in the USA

5337 Marshalltown V Notched 3/16in Margin Trowel
Tile & Stone Tools > More Tile & Stone Tools > Trowels

Marshalltown V Notched 3/16" Margin Trowel

3/16" V notch margin trowel 5" x 2".
Forged high grade steel.
Made in the USA

5338 Alpha Quad Adapter 20mm
Shop by Brand > Alpha > Alpha Diamond Blades

Alpha Quad Adapter 20mm

Quad adapter for use with Pearl & Alpha quad ready blades
20mm Quad Drive
Quad Drive Adapter, eliminates the required lock nut.
The threaded arbor permits mounting on angle grinders for â€œflush cuttingâ€ applications.
Designed to be used for cutting applications with their existing safety guard in place.
Fabricators use Alpha Quad to make 90 degree inside corners cleanly and efficiently.
Monument builders can easily clean up marks left from large diameter saw cuts.
General contractors love to convert their angle grinder into a cutting tool on the job site. Also very popular for sculptors who want to reach tight corners and hard to reach areas.

5224 Gemini Revolution XT Carriage Kit - Tile & Stone Saw Accessories

2009-05-02T10:12:00.003-07:00

5224 Gemini Revolution XT Carriage Kit
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

XT CARRIAGE

This high quality tool makes precision cutting possible.
With a hook and loop top, the carriage accessories can be placed exactly where they are needed.
All shapes are possible, allowing the user to make perfectly straight cuts, and even slice off as little as 1/8â€ without blade wander.

The carriage kit comes complete with:

Two 45 degree Angles
Two 30 degree-60 degree Angles
Two 5 foot Rails (24â€ diagonal capacity)
1 Fence Stop

5225 Rubi TS Plus Tile Cutter
Tile & Stone Tools > Tile Cutters & Nippers > Tile Cutters

Rubi TS Plus Tile Cutter

Free Anti-shock plastic carrying case, 6mm and 8mm carbide cutting wheels
High performance, single point breaker. 1654 lbs of breaking force
Special mounting for the breaker system
Chromed and rectified steel guides, with anti-corrosion treatment
Lateral Stop for straight and 45 degree repetitive cutting
Ergonomic Shape and Reinforced Base
Direct vision of the scoring and cutting line

5226 QEP 24in Bridge Tile Saw Model 83200
Tile & Stone Tools > Tile Saws & Stone Saws > 20in to 25in Tile Saws

QEP 24" Wet Tile Bridge Saw

Value-driven, dependable bridge saw is ideal for cutting large format pieces of tile, marble, granite and stone and offers the features usually found in saws that are as much as twice the price.

Free rear wheel attachment for easy transport, laser cutting guide, 8" diamond blade, folding stand, & water pump
Rip cuts tile 24" square, 18" diagonal
Powerful 1.5 hp, 9.2 Amps, 3550 Rpm motor
Laser cutting guide
Motor trolley unit rides on 6 ball bearings for improved cutting
Weighs 106 lbs.
Size: 37" L x 18" W x 47" H (w/ legs)
Foldâ€“out stand with rear wheels.
8" blade with standard 5/8" arbor

5227 Rubi Maxi Separator
Tile & Stone Tools > Tile Cutters & Nippers > Tile Cutters

Rubi Maxi Separator

$89.99 Special Price $150.00 list price
Extend the power of your tile cutter to unexpected limits!
Score the tile with your tile cutter and break it with the Maxi Separator
Works great on Porcelain, hard floor tile etc.
Break thin strips easily!
Breaking power 2,204.00 lbs
Maximum breaking capacity 1-3/8"

5230 QEP 83240 40in Tile Rail Saw
Shop by Brand > QEP

Item is currently is not available until April 10th 2009

QEP 83240 40" Wet Tile Bridge Saw features

Value-driven, dependable bridge saw is ideal for cutting large format pieces of tile, marble, granite and stone and offers the features usually found in saws that are as much as twice the price.

Free Shipping from QEP factory warehouse
Motor trolley unit rides on 6 Ball Bearings for improved cutting
Adjustable leg for set up on uneven surfaces
Adjustable pivoting rail allows easy angle positioning

Accessories Included

Foldout stand with wheels
10" Continuous rim blade with standard 5/8" arbor.
High Volume water pump
Laser cutting guide easily projects the blades cutting path
Side extension table to support large tiles.
Angle cutting guide
Handles for easy transport
10" Blade included works best on regular tile for cutting hard tile we recommend Mk-225 porcelain diamond blade.
Automatic thermal overload protection prevents the saw from overheating and power surges.
Size: 55-1/2" L x 37.2" W x 48" H (w/legs)

5213 Standard Diamond Blade for Gemini Revolution Tile Saw - Wet Diamond Blades For Porcelain & Granite

2009-05-02T10:12:00.001-07:00

5213 Standard Diamond Blade for Gemini Revolution Tile Saw
Tile & Stone Tools > Tile & Stone Diamond Blades > Wet Diamond Blades For Porcelain & Granite

10" Diamond blade, fits the Revolution wet saw.

The Gemini Saw Revolution XT Single Sided 10" Diamond Blade provides a higher quality cut with less chipping.
High quality blade Engineered for cutting curves in hard materials, granite, porcelain, marble, floor tile, etc.
Radius: 3/4"
Sintered diamond blade for forward cutting.
Designed for the Gemini Revolution XT.

5214 Double Sided Diamond Blade for Gemini Revolution Tile Saw
Tile & Stone Tools > Tile & Stone Diamond Blades > Wet Diamond Blades For Porcelain & Granite

Double Sided Diamond Blade for Gemini Revolution Tile Saw

The Gemini Saw Revolution XT Single Sided 10" Diamond Blade provides a higher quality cut with less chipping.
10" diameter sintered diamond
Forward and backward cutting
Tighter 3/8" radius
Longer blade life
Designed for the Gemini Revolution XT.

5221 Barwalt Ultralife Handle & Latch
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Barwalt Ultralife Handle & Latch

Handle is made of high-impact glass-filled, chemically resistant nylon with a comfortable texture cushion grip for good control.
16 stainless steel trowels notch to choose from.
A complete trowel acts as a handle and lid for the case so that, in the space of a lunch box, an installer can carry as many as eight trowels!

5222 Barwalt Ultralife Trowel Carrying Case
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Barwalt Ultralife Trowel Carrying Case

Trowel carrying case holds up to seven blades.
A complete trowel will act as a handle and lid for the case.
16 stainless steel trowels to choose from.
The interchangeable blades are made with premium stainless steel.
A complete trowel acts as a handle and lid for the case so that, in the space of a lunch box, an installer can carry as many as eight trowels!

5223 Gemini Revolution XT Curve Cutting Saw
Tile & Stone Tools > Tile Saws & Stone Saws > 20in to 25in Tile Saws

Gemini Revolution XT Tile Saw

We do not recommend this saw for straight cuts Cuts a radius, curve or straight line!

10" Diamond Ring ring blade cuts up to 2" thick materials
The Ring Blade has no center giving you the ability to cut intricate designs and tight radius cuts as small as 1/2"
Has 5 times more power (torque) than other 1.5 hp saws!
Weight: 39 lbs
1 hp, 115V, high torque motor
Makes curved cuts in 2" granite!
Two year warranty

Gemini Revolution Tile Saw FAQ

A: There is no pump with a ring saw. Because the belt that drives the blade also picks up and delivers water to the cut, there is no need for one.

Q: What is a Ring Saw?

A: A Ring Saw is a unique, patented saw, combining the best qualities of a band saw and radial saw.

Q: What does the Ring Saw cut?

A: The Ring Saw will cut any hard material including stone, granite, marble, glass, shell, non ferrous metals, acrylic, and plexiglass.

Q: How can diamond blades cut hard materials but do not cut skin?

A: Skin bounces off of the diamond's riding over the bumps, but hard materials can not bounce so they get cut.

Q: What is the difference between a Ring Saw and a band saw?

A: Ring Saw's spin in a perfect circle and cut in all directions. Band saws travel in an ellipse, can cut basically forward like a polliwog travels.

Q: What is the difference between a Ring Saw and a reciprocating saw?

A: Ring Saws cut while spinning in a perfect circle, so there is little or no vibration while cutting. Jig saws vibrate cut on the up stroke causing delicate pieces to break and wear out much more quickly than Ring Saws.

Q: Do I have to use water with my Ring Saw?

A: Always use water.

Q: When should I replace my wear parts?

A: The average life of the drive belt is two to three blades.

The Revolution blades are very similar to the solid 10" diameter blades you will find on most wet saws. The difference is that our blades have no center, giving you the ability to not only cut straight lines but also make tight radius cuts. Because we run our blades at a much slower R.P.M. than the average wet saw but with far more torque, they give the user a much higher quality cut with far less chipping and in some cases superior blade life.

5102 4in Replacement Blades 10 per Tube - Other Barwalt Tiling Tools

2009-05-02T10:11:00.005-07:00

5102 4in Replacement Blades 10 per Tube
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Barwalt 4" replacement Blades 10 pcs per Tube

5103 4in Replacement Blades 100 per Box
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Barwalt 4" scraper replacement blades 100 pcs

5110 Makita GV-5010 5in Disc Sander
Tile & Stone Tools > Polishing & Profiling Equipment > Polishers, Sanders, & Profiling Equipment

Makita GV-5010 5" Disc Sander

Comfortable Rubberized Grip for improved operator comfort and control.
Lightweight for easy operation.
Ball and needle bearings for long tool life.
Weight 2.4 lbs, 4.2 Amps, 4,500 Rpm. (No load speed).
Length 7-1/8"
Double insulated

INCLUDES:

Abrasive Disc (742109-9)
Plastic Pad (743025-8)
Side Handle (152491-2)
Hex Wrench (783203-8)

5112 5in GV-5000 Hook and Loop Backer Pad
Shop by Brand > Alpha > Alpha Diamond Polishing Pads & Sandpaper

5" GV-5000 Hook and Loop Backer Pad

Fits the Makita GV-5000 disc sander.
5" Hook and Loop backer pad for attaching sand paper, or felt wheels.
the MakitaÂ® GV5000 Sander has become one of the preferred tools for marble polishing applications.
However, its backer pad required the use of messy glues and adhesives.
We introduced the AlphaÂ® GV Backer Pad. The first hook and loop backer pad for the GV5000, is designed to fit on the GV5000â€™s unique spindle and attachment configuration.
This backer pad is ideal for bullnosed edges and flat surfaces.
Marble fabricators and tile contractors can now utilize hook and loop backed products such as Sandpaper and Felt Wheels on their GV5000 polisher with excellent results.
The GV Backer Pad provides just the right amount of flexibility to successfully polish curved areas yet remains rigid enough to polish flat surfaces.
The GV Backer Pad will accept other types of hook and loop backed products, thus making this tool a truly versatile machine that can be used for stone, tile, metal, wood and glass.
If you own or plan on owning a Makita GV5000 Sander, the AlphaÂ® GV Backer Pad is for you.

5212 Gemini Revolution Folding Stand
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Folding stand for Gemini Revolution wet tile saw.

4938 CRESCENT-DIAMOND Tile Nippers - Tile Cutters & Nippers > Tile Nippers

2009-05-02T10:11:00.003-07:00

4938 CRESCENT-DIAMOND Tile Nippers
Tile & Stone Tools > Tile Cutters & Nippers > Tile Nippers

CRESCENT-DIAMOND Tile Nippers

5/8" jaws with carbide tips.
Professional nippers
Long lasting carbide cutting edges
Handle spring to reduce fatigue and permit fast, repetitive cutting
Dark red plastic handle grips
Maximum thickness 29/64 in. / 11 mm.
Cutting edge length 13/16 in. / 30 mm.
Forged high grade steel, made in the USA.
Tile nippers are used to make circular cuts in ceramic tile.
Can be used to make straight or angled cuts although you will find it much easier to use a tile cutter or wet saw to make these types of cuts.
Take small "nips" or "bites" out of it using the tile nippers. Take your time and keep the "bites" small, otherwise you risk breaking the tile and having to start all over again.
Once the tile is completely cut use a piece of 60 grit sandpaper or a special rubbing stone used by ceramic tile contractors to smooth the finished edge.
Especially when the cut will be exposed (e.g. around shower drains) as the edge of the cut tile will be very sharp.

4939 Rubi Porcelain Tile Nipper
Tile & Stone Tools > Tile Cutters & Nippers > Tile Nippers

Rubi Porcelain Tile Nipper

Porcelain tile nipper, heat treated carbon steel tips can be re-sharpened.
Reinforced center spring.
Nibble tile into shape with this tool's scissor-style Tungsten-carbide tip blades.
The scissor action makes it easier to cut hard ceramic dinnerware with Rubi porcelain nippers.
Made in Spain for mosaic applications.
Must be used with safety glasses with side shields.
Not recommended for glass.
Keep in mind that some types of dinnerware (porcelain) are among the hardest engineered materials known to man (no exaggeration), so you may occasionally find some tile that seem unbreakable. They were in fact designed to be. Our experience in the mosaic cutting is that these particularly hard types of dinnerware produce razor sharp shards and splinters.

4940 Alpha 3/8in Wet Profiler PFB101
Shop by Brand > Alpha > Alpha Profilers & Cup Wheels

Alpha Wet 3/8" Profiler PFB101

3/8" roundover on granite, marble, engineered stone and porcelain tile and slab.
Wet cutting wheel with a 5/8"-11 female
Nylon guide slides along the surface to make this tool nearly "Goof-proof"
An operator with little or no fabrication skills can easily create a perfect roundover on tile or slab.
Designed with the tile contractor in mind, slab fabricators will also value the benefits of using the AlphaÂ® Profiler B-Series.
Making use of the latest vacuum brazed technology and utilizing diamonds best suited for harder materials, AlphaÂ® created this wet-cutting wheel.
Equipped with a 5/8â€-11 female thread and internal water passage holes, the AlphaÂ® Profiler B-Series will fit the AIR-658, AWP-158, VSP-110 and other brands of center water-feed polishers.
Use this wheel to create a perfect roundover edge treatment and polish it with Ceramica EX for a superior professional finish.

4941 Alpha 3/4in Wet Half Round Profiler PFB201
Shop by Brand > Alpha > Alpha Profilers & Cup Wheels

Alpha 3/4" Wet Half Round Profiler PFB201

3/4" round profiler for granite, engineered stone and porcelain
Wet cutting wheel with a 5/8"-11 female
Nylon guide slides along the surface to make this tool nearly "Goof-proof"
An operator with little or no fabrication skills can easily create a perfect roundover on tile or slab.
Designed with the tile contractor in mind, slab fabricators will also value the benefits of using the AlphaÂ® Profiler B-Series.
Making use of the latest vacuum brazed technology and utilizing diamonds best suited for harder materials, AlphaÂ® created this wet-cutting wheel.
Equipped with a 5/8â€-11 female thread and internal water passage holes, the AlphaÂ® Profiler B-Series will fit the AIR-658, AWP-158, VSP-110 and other brands of center water-feed polishers.
Use this wheel to create a perfect roundover edge treatment and polish it with Ceramica EX for a superior professional finish.

5045 Target by Husqvarna Portasaw Water Pump
Shop by Brand > Target & Partner by Husqvarna > Target by Husqvarna Masonry & Concrete Saw Accessories

Electric water pump, for Target by Husqvarna Portasaws.

Original replacement part.

4778 Mega Blade Kit for Gemini Tile Shaper - Gemini Saw Parts & Accessories

2009-05-02T10:11:00.001-07:00

4778 Mega Blade Kit for Gemini Tile Shaper
Shop by Brand > Gemini Saw Co > Gemini Saw Parts & Accessories

Replacement mega blade with rollers for Gemini Tile Shaper (Taurus 3)

For dense materials. Because of its â€œtear dropâ€ shape, the Mega Blade is our strongest blade ever. To date, no one has been able to break one.
This blade is used differently than our Omni-directional blades. It is cuts mainly on the front and back, so to create a curve you will guide the material around the blade.
The Mega blade is so rigid that it has the ability to damage the saw itself if used improperly by pushing too hard.
So keep in mind the â€œgolden ruleâ€ to let the saw do the cutting and do not force the material.
All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan

4827 Razorbacker Snapper Shear SS424
Tile & Stone Tools > More Tile & Stone Tools > Other Tile & Stone Tools

MODEL SS424
Backerboard Shear

Looking for the quickest and cleanest way to cut backer board?
Razorbacker slices through Hardibacker superfast, easy and straight; cuts great curves too.
There's no dirty cement dust or grit to scratch enamel or ceramics and make your clean-up a headache.
Cuts HardiBacker backerboard up to 1/2" thick.
For straight and curved cuts.
Smooth, fast, and dust-free operation. Based on a 1/2" 6.5 Amp motor.
Reversible blades machined from solid tool steel.

48271 Razor Backer Blade Kit
Tile & Stone Tools > More Tile & Stone Tools > Other Tile & Stone Tools

Razor Backer Blade Kit

4930 4in Marshalltown Brick Chisel W Hand Grip
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

4" Marshalltown Brick Chisel W Hand Grip

4-1/2" handle with comfortable rubber grip.
Perfect for removing floor tile or wall tile, stone.
Forged from highest carbon steel hardened and tempered. 8-3/4" x 4".

4935 Tile Nipper for Hard Ceramics
Customer Service > Quantity Pricing

Tile Nipper for Hard Ceramics

Made in Japan from drop forged steel, carbide tips for long life.
Super tough carbide cutting edges for precision work and long life
Shapes and contours tiles
Drop forged steel construction
5/8" jaws opening
Return spring for opening and closing of jaws
Quantity discount, buy 3 Pcs pay only $10.99

4765 Marshalltown Quarry Pliers - Tile Nippers

2009-05-02T10:10:00.003-07:00

4765 Marshalltown Quarry Pliers
Tile & Stone Tools > Tile Cutters & Nippers > Tile Nippers

Marshalltown Quarry Pliers

Longer 10" handle capable of cutting thicker, harder tile.
5/8" TOSHIBA carbide tips for longer life

4766 EZ-Cut Adjustable Pattern Tool
Tile & Stone Tools > More Tile & Stone Tools > Layout & Marking Tools

EZ-Cut Adjustable Pattern Tool

Kit consist of five 1" x 12" lockable straight edges.
The straight edges can be locked at any angle by pressing the sticks together.
Make accurate complex cuts.
No more waste of tile due to mistakes.
Saves hours in cutting time.
Makes diagonal cuts as fast as straight.
Makes the novice a professional & saves time for the professional.

4773 Gemini Taurus 3 Tile Shaper Ring Saw
Tile & Stone Tools > Tile Saws & Stone Saws > 13in to 19in Tile Saws

Gemini Taurus 3 Tile Shaper Ring Saw

Light duty ring saw, using the same technology found in the Revolution wet saw.
The tool's cutting blade is a veritable "ring" of stainless steel whose 360 degree surface is completely coated with diamond grit.
You can feed a piece of wall tile or glass into the blade from any direction and get a clean, accurate cut.
Since the blade cuts so precisely, no further grinding is necessary.
It produces finished cuts with intricacies that are impossible with conventional cutters.
The tile shaper is portable, as it is easy to lift the motor and saw housing from the basin.
Tile Shaper Separating Blade sold separately.

Taurus 3 Blades

All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan, and anything that has a similar density to these materials.
All blades use the same belt and grommets. Blades are interchangeable with the same belt and grommets and do not need to be changed unless they are excessively worn.
Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life. There is an optimum speed for each blade in each material; you can feel it while you are cutting. Sensitivity to this causes extremely long blade life Defined it is that point at which you get maximum cutting speed for minimal pressure.

4774 Grout Caddy Cleaning System
Tile & Stone Tools > Tile Grouting Tools > Grout Cleaning Systems

Grout Caddy Cleaning System

This complete system will cut your grouting time by 30% to 50% and you will never squeeze a sponge again!

Comes with a large bucket and 2 sturdy spiral rollers designed to direct the flow into the bucket.
Long lasting stainless steel roller assembly, never rust or bends
Kit includes one handle with two slitted sponges.
Sponges attach with hook and loop fastening system
4 wheels for mobility.
5" x 10" sponge.
5 Gallon grouting bucket.

4775 Standard Blade for Gemini Tuarus 3 Tile Shaper
Shop by Brand > Gemini Saw Co > Gemini Saw Parts & Accessories

Diamond replacement blade for the TileShaper, and Taurus 2 & 3 models.

Taurus 3 Blades

Standard Blade Features

For general use, Omni-directional. The Standard blade gives you strength as well as versatility in all materials.
Because the blade is round you have the ability to cut in any direction. The 360 degree diamond coating allows the blade to cut quickly while grinding the edge, leaving it smooth.
All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan, and anything that has a similar density to these materials.
All blades use the same belt and grommets. Blades are interchangeable with the same belt and grommets and do not need to be changed unless they are excessively worn.
Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life. There is an optimum speed for each blade in each material; you can feel it while you are cutting. Sensitivity to this causes extremely long blade life Defined it is that point at which you get maximum cutting speed for minimal pressure.

Porter Cable 43229 1/4in Solid Carbide Cutout Bit - Other Tile & Stone Tools

2009-05-02T10:10:00.001-07:00

Porter Cable 43229 1/4in Solid Carbide Cutout Bit
Tile & Stone Tools > More Tile & Stone Tools > Other Tile & Stone Tools

Porter-Cable 43229 Solid Carbide Burr Bit 1/4"

Bits are interchangeable with Roto-Zip bits.
Solid carbide construction durable, with long lasting sharpness
Cuts ceramic tile, grout joints and cement board
Use in any router w/ 1/4" collet

4577 Quikpoint Mortar Gun W/ Drill
Concrete & Masonry Tools > Concrete & Mortar Mixers > Concrete & Grout Pumps

Quikpoint Mortar Gun With Drill

For tuckpointing, brick work, stone work, thin brick, grouting, crack repair, and glass block.

Speeds application of mortar 5 times faster to all types of masonry joints.

Quick, clean, and accurate!

Uses all standard and pre-mixed pointing mortars.
Excellent mortar penetration. Vibrator fed auger drive assures constant mortar bead.
Unbreakable polyurethane body and nozzle holder.
Takes just 10 seconds to reload 1/2 gallon hopper.
Quick clean up in less than a minute simply by flushing with water.
Portable, weighs only 10 pounds (approximately 13 pounds loaded).
Specially designed nozzle with 4 interchangeable steel tips (small: 3/16" X 0.8", medium: 1/4" X 0.8", large: 0.55" X 0.66", and special angled tip for overhead work 1/4" x 0.8").
Nozzle rotates for horizontal and vertical joints.
Quikpoint Mortar Gun is powered by a Makita 5.2 Amps drill, with heavy vinyl drill boot for dust and moisture protection.

4578 Quikpoint Mortar Gun Without Drill
Concrete & Masonry Tools > Concrete & Mortar Mixers > Concrete & Grout Pumps

Quickpoint Mortar Gun Without Drill.

For tuckpointing, brick work, stone work, thin brick, grouting, crack repair, and glass block.

Speeds application of mortar 5 times faster to all types of masonry joints.

Quick, clean, and accurate!

Uses all standard and pre-mixed pointing mortars.
Excellent mortar penetration. Vibrator fed auger drive assures constant mortar bead.
Unbreakable polyurethane body and nozzle holder.
Takes just 10 seconds to reload 1/2 gallon hopper.
Quick clean up in less than a minute simply by flushing with water.
Portable, weighs only 10 pounds (approximately 13 pounds loaded).
Specially designed nozzle with 4 interchangeable steel tips (small: 3/16" X 0.8", medium: 1/4" X 0.8", large: 0.55" X 0.66", and special angled tip for overhead work 1/4" x 0.8").
Nozzle rotates for horizontal and vertical joints.
Mounts any 3/8" drill, if you are using a cordless drill must be 18Volts

4579 Gibco's MRF
Concrete & Masonry Tools > Concrete & Mortar Mixers > Concrete & Grout Pumps

Gibco's MRF

Admixtures to enhance the performance of masonry mortars & cement based plaster

Greater resistance to freeze & thaw
Replaces lime
Reduces water penetration
No efflorescence
Lower batch cost
Reduced shrinkage
Less storage & handling
Avoids waste
Less call backs
Non-tonic, non-hazardous

Specification for the use of Gibco's MRF

4A-Mortar

Mixture for ASTM C270 Type "M" Mortar shall be 1 bag of Portland Cement Type I or II, 3 ounces of GIBCO'S MRF and 2 1/4 to 2 and 3/4 cubic feet of masonry sand.
Mixture for ASTM C270 Type "S" Mortar shall be 1 bag Portland Cement Type I or II, 3 ounces of GIBCO'S MRF and 3 to 3 1/2 cubic feet of masonry sand.
Mixture for ASTM C270 Type "N" Mortar shall be 1 bag of Portland Cement Type I or II, 3 ounces of GIBCO'S MRF and 3 to 3 1/2 cubic feet of masonry sand.
The masonry sand shall comply with ASTM C144 specifications.

4760 6in X 2-3/4in Marshalltown Pointing Trowel
Tile & Stone Tools > More Tile & Stone Tools > Trowels

Marshalltown Pointing Trowel

Forged from a single piece of high carbon steel.
Size 6" x 2-3/4".

42371K MK-370EXP Wet Tile Saw Kit - 13in to 19in Tile Saws

2009-05-02T10:09:00.003-07:00

42371K MK-370EXP Wet Tile Saw Kit
Tile & Stone Tools > Tile Saws & Stone Saws > 13in to 19in Tile Saws

MK-370 EXP Tile Wet Saw Features

Free shipping from MK factory warehouse to lower 48 states

We will charge applicable sales tax, for a factory direct drop-ship of the MK-370EXP Tile Wet Saw In the state of California

Free folding stand, rip guide, & 3 pcs professional cutting package: dressing stone, adjustable protractor angle guide, and 45 degree dual angle protractor

7" MK-200 blade included.

Powerful high-torque universal motor with maintenance-free, self-lubricating pinion and gear-box assembly
Tilting head allows for precise 45Âº miter cuts
Variable height cutting head allows for plunge cutting
Sliding aluminum die-cast cutting table
3/4" diameter chrome-plated linear guide-bar system
Single piece zinc-plated steel frame for rigidity, strength, and durability
Heavy duty on/off switch
Built-in water pump receptacle
Removable thermoplastic water reservoir
MK-Safeswitchâ„¢ prevents saw from being operated when locking key is removed
One-year limited warranty

42372 MK 370 EXP Stand
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK 370 EXP Stand

MK 370 EXP Folding Stand
Stand included with purchase of a new MK-370exp

4275 IMER Minuteman Portable Mixer
Concrete & Masonry Tools > Concrete & Mortar Mixers > Portable Concrete Mixers

Imer Minuteman II Portable Mixer

Free shipping from IMER factory warehouse

Speed

Mix 275lbs of mortar, stucco, grout and concrete in less than 4 minutes.
Power
The fully enclosed 1/2hp, 110v industrial grade motor with direct gear drive provides non-stop performance on any construction project.
Direct drive gearbox - No belts to tighten, no bearings to grease, absolutely the most reliable drive system available today!
These mixers truly are Contractor duty!
Portablility
In just a minute, the Minuteman or Wheelman can be "knocked down" into 3 easy to load components.
All this by one person, with no tools required!

Imer's Message
"The Minuteman continues to reign as the World's finest portable concrete Mixer. Like all champions the Minuteman is a unique blend of power, speed and reliability."
Mace T. Coleman Jr.
President IMER U.S.A.

Project-Mixing	Imer Product Application
Mixing Concrete (small batch-250lbs or less)	Minuteman or Wheelman
Mixing Concrete (large batch 400-800lbs)	Workman 250 or 350
Stucco (small batch-1 bag 80lbs or less)	Mini Mix 60
Stucco (medium batch-2 bag 80lbs)	Mortarman 120
Stucco (large batch 400lbs or more)	Workman 250 and 350
Mortar (small batch 80lbs or less)	Mini Mix 60
Mortar (small batch 160lbs-270lbs)	Mortarman 120 or Minuteman
Mortar (large batch 400lbs-800lbs)	Workman 250 or 350

4276 IMER Mortarman 120 Portable Mixer
Concrete & Masonry Tools > Concrete & Mortar Mixers > Portable Mortar Mixers

Free shipping from IMER factory warehouse.
The Mortarman 120 is perfect for the 2-3 person construction crew.
Why go through all the hassles of towing a mixer to the job site, when the Mortarman 120 can make a wheelbarrow of mortar, stucco, grout or dry pack mortar every 5 minutes!

4316 Jacobs Chuck Adaptor 5/8-11
Tile & Stone Tools > Drilling Tile & Stone > Guides & Accessories

Jacobs Chuck Adaptor 5/8-11 in.

Jacobs Chuck Adapter
Converts standard electric drill to 3/8"-11 thread.
For use with coring bits
1/2" shank to 5/8"-11 male thread.

4231 Makita 9564CV 4-1/2in Variable Speed Angle Grinder - Angle Grinders

2009-05-02T10:09:00.001-07:00

4231 Makita 9564CV 4-1/2in Variable Speed Angle Grinder
General Tools > Power Tools > Angle Grinders

Makita 4-1/2" Variable Speed Angle Grinder

For sanding, polishing, and grinding applications.
12 Amp, weight 4 lbs. 5/8"-11 spindle thread.
Variable speed 2,800 to 10,500 Rpm.
SJS prevents tool kickback caused by accidental wheel binding.
Labyrinth construction seals motor and bearings from dust.

4232 Makita PW5001C Variable Speed Wet Polisher
Tile & Stone Tools > Polishing & Profiling Equipment > Polishers, Sanders, & Profiling Equipment

Makita PW5001C Variable Speed Wet Polisher

For sanding, polishing, and grinding applications.
7.9 AMPS, weight 4.6 lbs. 5/8"-11 spindle thread.
Variable speed 2,000 to 4,000 RPM.
Labyrinth construction seals motor and bearings from dust
Includes 4" hook and loop backer pad and ground fault interrupter.

4232K Makita Wet Variable Polisher Kit
Tile & Stone Tools > Polishing & Profiling Equipment > Polishers, Sanders, & Profiling Equipment

Makita Wet Variable Polisher Kit

For sanding, polishing, and grinding applications.
Includes 9 Granite polishing pads, attached water feed, hook and loop pad and ground fault interrupter.
Grits 50, 100, 200, 400, 800, 1500, 3000, black & white final buff.
7.9 Amps, weight 4.6 lbs. 5/8"-11 spindle thread.
Variable speed 2,000 to 4,000 Rpm.
Labyrinth construction seals motor and bearings from dust.
Includes attached water feed, hook and loop backer pad and ground fault interrupter

4235 MK-370/470 Water Hood
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK-370/470 Water Hood

Two-piece water hood helps contain water around the work area.
For MK-270, MK-370, & MK-470 only.
Will not fit EXP models

4236 MK-770 Water Hood
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK-770 Water Hood

Two-piece water hood helps contain water around the work area.
For MK-770 only, will not fit EXP models.

31382 Barwalt 5 Pc Bent Angle Straight Edges - Other Barwalt Tiling Tools

2009-05-02T10:08:00.005-07:00

31382 Barwalt 5 Pc Bent Angle Straight Edges
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Barwalt 5 Pc Bent Angle Straight Edges

3-1/2" high with a 1" bent angle, 1/8" thick.
Quality hardened extruded aluminum straight edges.
5-piece kit includes: 2', 3', 4', 4' 10", and 6' lengths.
Will not warp or rot.

3141 Grout Saw Repl Blades
Tile & Stone Tools > Tile Grouting Tools > Grout Removal Tools

Grout saw Repl. blades

349090 Tomecanic 6 pcs Wet Diamond Drill Bit Kit
Customer Service > Wholesale

Wet Porcelain Drilling Kit In Case:

Kit Includes:

6 diamond bits Ã˜ 1", 1-3/8", 1-3/4", 2", 2-1/2", 3".
1 universal drilling guide with suction cup
Tested and approved by our team.

349131 Tomecanic 4pcs Wet Porcelain Drill Bits, 1/4in, 5/16in, 3/8in, 3/4in
Customer Service > Wholesale

Tomecanic 4pcs Wet Porcelain drill bit, 1/4", 5/16", 3/8", 3/4" Kit.

Foragres wet 4pcs drill bit set.
4 diamond bits Ã˜ 1/4"(6mm), 5/16" (8mm), 3/8" (10mm), 3/4" (18mm).
Plastic carrying case included with kit.
Use with adjustable hole saw guide.
We tested this bit in hard porcelain and the results speak for themselves!
Unsatisfactory results with FORAGRES WET mostly come from an excessive cutting speed.
In some materials, he can also rely on the noise:
if you hear "bzzzzz" it's OK.
if you hear "crrrrrrr" there is something wrong.

4230 Makita 6013BR 1/2in Mixing Drill
Tile & Stone Tools > Grout Mixers > Mixers & Drills

6013BR 1/2" Mixing Drill

Industrial quality chuck.
Heavy-duty 2-stage gearing.
D handle rotates 360 degrees
Weight 6.2 lbs, 6.3 Amps, 550 Rpm.
Ball bearing construction for long tool life and smooth operation
Heavy duty industrial 1/2" drill chuck for positive bit retention and accurate drilling
Handy chuck key is retained in handle to prevent loss
100% ball & needle bearings.
Reversible, dust sealed switch.
Drills to 1/2" in steel
1-3/8" in wood
Rocker type switch for easy one-handed forward or reverse operation.

3119 4in Scraper Blade for Makita Power Scraper - Tile Removal (Scalers, Scrapers)

2009-05-02T10:08:00.003-07:00

3119 4in Scraper Blade for Makita Power Scraper
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

Replacement 4" Scraper Blade for Makita Power Scraper

Fits the scraper assembly for the Makita HK-1810 Demo hammer.

3121K MK-101 PRO24 Tile Wet Saw W/Stand
Tile & Stone Tools > Tile Saws & Stone Saws > 20in to 25in Tile Saws

MK-101Pro 24 Series Features

Free shipping from MK factory warehouse to lower 48 states
We will charge applicable sales tax, for a factory direct drop-ship of the MK-101Pro 24 Tile Wet Saw In the state of California
Free 10" MK-225 Hot Dog premium porcelain diamond blade, side extension table, water pump, stand w/ wheels, rip guide, large miter guide, dressing stone, adjustable protractor, and dual angle guide.
High torque belt driven 115V/60Hz 2 HP motor
24" rip cut capacity. 18" x 18" diagonal cuts
Weighs 108 lbs
Depth of cut (10" Blade): 3-3/4"
Dimensions: 41" x 21.5" x 22.5"
Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
Multi-position motor post and cutting head for convenient cutting of various tile sizes
Built-in water distribution system supplies water to both sides of blade
Variable height cutting head allows for plunge cuts and use of blades smaller than 10" in diameter
Accommodates 6"' and 8" profile wheels
Blade shaft lock for easy blade removal
Cast aluminum blade guard and motor post
One-piece reinforced zinc-plated steel frame
One-year limited warranty

3136 Makita HM1100C 13.5 lbs Demo Hammer SDS Max
Concrete & Masonry Tools > Hammer Drills & Demolition Hammers > Demolition Hammers

Makita HM1100C 13.5LB Demo Hammer SDS Max.

Weight 14 lbs.
11 AMPS. 20-5/8" Long.
1300-2650 blows per minute.
Plastic Carrying case included.
Chisel not Included.
SDS-Max technology gives you a more precise impact and reduced friction for increased tool life.
SDS-MAX Shank

3138 Barwalt Precision Straight Edges
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Barwalt 5 Pcs kit straight edges kit.

Made of tempered aluminum to make them tough, yet light.
Size: 3" x 7/8".
Five-piece kit includes: 2'2". 3', 4', 4'10" and 6' lengths.
Sets feature vinyl tote for comfortable transportation.
Cut from 3" x 7/8" stock with reinforced construction.

31381 Barwalt 8' Aluminum Straight Edge
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Barwalt 8' Aluminum Straight Edge

Made of T-5 tempered aluminum to make them tough, yet light.
Size: 8 ft. Long x 3" High x 7/8" Wide.
Straight edge should always be stored in a flat position, not leaning against a wall, to prevent distortion.
Used for screeding and floating mud.

3098 3M 4in Continuous Resin Cushion Cup Wheel - Profile & Cup Wheels

2009-05-02T10:08:00.001-07:00

3098 3M 4in Continuous Resin Cushion Cup Wheel
Tile & Stone Tools > Polishing & Profiling Equipment > Profile & Cup Wheels

3M 4" Continuous Resin Cushion Cup Wheel

Coarse grit, 4" diameter perfect for angle grinders
No bounce, best grinding and shaping tool ever, great for marble & granite
Designed for grinding and shaping of material for wet or dry use
Grinding wheels fit easily on most common high-speed electric angle Max 12,000 Rpm.
Fast removal of marble, granite and engineered stone.
5/8"-11 arbor

3102 MK-404CG-1 4in Segmented Cup Wheel Single Row
Shop by Brand > MK Diamond > MK Surface Preparation Tools

MK-404CG-1 4" Segmented Cup Wheel Single Row

Diamond Cup Wheel for fast grinding, mark removal, de-burring, rough surface grinding
Produces less dust and is more productive than abrasives

3104 Boomerangle 45 Degree Miter
Shop by Brand > Boomerangle

Boomerangle 45 Degree Miter

Allows tile to be diagonally cut at a precise 45 degree angle for easier installation and faster set up and cutting time.
Made in the USA.
Fits most tile saws including Target, MK and Felker saws.
V-CAP Miter also available.

3105 Miter V-Caps for Boomerangle
Shop by Brand > Boomerangle

Miter V-Caps for Boomerangle

Attaches easily to Boomerangle 45 (required).
Cut many types of trim tiles time after time with fewer mis-cuts.
Miter V-caps, quarter round and radius tiles in two positions.
Will also cut field tile at any degree.

3110 Beckett Repl. Pump for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Beckett Repl. Pump for Husqvarna, Target, & Felker Tile Saws

Original replacement pump for Husqvarna, Target, & Felker 1.5 hp Tile Saws.
Made by Beckett co, model G100, 6' cord, 130 gallons per hour.
Pump for Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.

3072 4in Scaper Assembly for Makita Power Scraper - Tile Removal (Scalers, Scrapers)

2009-05-02T10:07:00.005-07:00

3072 4in Scaper Assembly for Makita Power Scraper
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

Use with the Makita Power scraper HK-1810.

Includes one scraper blade

3075 Makita HK0500 SDS+ Power Scraper
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

Makita HK0500 SDS+ Power Scraper

Variable speed, SDS-Plus, Weight: 6.8 pounds
Lightweight and easy to handle
Compact and comfortable design
Features a one-touch sliding chuck for easy bit installation and removal.
Large and comfortable trigger switch and variable speed control dial.
5.0 amps: 115 Volts; 2,000â€“ 3,500 BPM;
Includes 1-1/2" x 8" chisel and plastic case.
The HK0500 Power Scraper (SDS) from Makita has a compact portable design that is excellent for removing tile and mortar.
A specially designed small diameter barrel for easy gripping and a large one touch sliding chuck for easy bit installation and removal.
Powerful 5 amp. motor delivers 2,000-3,500 BPM for maximum performance. The 12 position bit adjustment allows for the scrapper blade to be easily positioned without removing from the chuck.
Product Dimensions: 19 x 14 x 6 inches

SDS-PLUS Shank

3076 1-1/2in SDS-Plus for Makita HK0500 Scraper
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

1-1/2" SDS-Plus for Makita HK0500 Scraper

SDS-PLUS Shank

3077 4in Scraper Assembly SDS-Plus for Makita HK0500 Scraper
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

SDS-Plus Scraper assembly for wall tile, vinyl, thin set removal.

SDS-PLUS Shank

3082 Marshalltown White Medium Conditioning Stick
Tile & Stone Tools > More Tile & Stone Tools > Other Tile & Stone Tools

Aluminum Oxide Dressing Stick, White Medium Grit

Use this block to "dress" your diamond blade or core drill for use. This block effectively removes the initial layer of metal off the blade exposing the diamonds underneath.

Specially formulated 60 grit dressing stone is used to expose new cutting surfaces on diamond blades.
Also use to clean the edge of the tile after cutting with a hand cutter.
Size 1" x 2" x 8"

30381 Folding Stand for MK Tile Saws - Tile & Stone Saw Accessories

2009-05-02T10:07:00.003-07:00

30381 Folding Stand for MK Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Stand for MK-100, MK-101, MK-101PRO, MK-660, MK-770, MK-880, & MK-1080 Wet Tile Saws

30382 Stand With Wheels for MK-101, 101 PRO, 101 PRO24, 100 & 770EXP Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Stand With Wheels for MK-101, 101 PRO, 101 PRO24, 100 & 770EXP Tile Saws

MK stand with wheels for MK-101, 101 PRO, 101 PRO24, 100 & 770 EXP tile saws.
Casters with brake lock.

30431 Rubi Anti-Foam Liquid
Tile & Stone Tools > Tile Grouting Tools > Repl Sponges for Grout Cleaning Equipment

Rubi Anti-Foam-Liquid

250cc 8.5oz bottle
Use to keep foam from building inside the wash bucket, when using an electric sponge machine.

30601 Variable Speed Control
General Tools > Power Tools > Accessories

Variable Speed Control

Use with mixing drills, or grinders to reduce speed electronically without reducing torque.
15 Amps Max
This handy device will slow down your grinder or your mixing drill.
You can now use a regular angle grinder for polishing or edge polishing with our quick change system.
The dial lets you select any speed under 4000 Rpm. Will not work on slow start tools.

3070 Makita Power Scraper HK1810
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

Makita Power Scraper HK1810

Air cushion hammering for long tool life.
Versatile tool for scraping and tile removal.
Weight 7.7 lbs. 5 AMPS 12-3/8" Long.
Quick change bit retainer for easy changes
Automatic brush cut-out system to protect motor
Factory grease packed for reduced maintenance
All ball bearing construction for longer tool life
Powerful 5 Amp motor with 0 - 3,200 BPM for maximum performance
Double insulated Includes tool case
Variable Speed 0-3200 blows per minute.
Carrying case, 1-3/16" & 2" scaling chisel and bull point included.

3023 Felker FRS-51 Rail Saw - 34in to 10 ft Stone Saws

2009-05-02T10:07:00.001-07:00

3023 Felker FRS-51 Rail Saw
Tile & Stone Tools > Tile Saws & Stone Saws > 34in to 10 ft Stone Saws

Felker FRS-51 Heavy Duty Rail Saws.

Free Shipping from Felker factory warehouse to a commercial address in the lower 48 states.
The FRS-51 allows you to make plunge cuts and rip cuts
The cutting head glides easily on sealed bearings.
Free table extension for large materials on left or right side.
Built-in handles for ease in transportation
Powerful 2 hp, 220 Volts. 8.3 Amps motor
14" blade capacity, 1" arbor, 1700 blade RPM
Depth of cut: 4.1", at 45Âº: 2.4"
Length of cut: 51"
Weight 317 lbs
Saw dimensions 67" L x 39" W x 51" H
Four-pieces cutting surface detaches from water pump.
Steel construction with powder coated finish resists wear and corrosion.
Blade not Included

3028 Felker TM-7 10in Porcelain Diamond Blade
Tile & Stone Tools > Tile & Stone Diamond Blades > Wet Diamond Blades For Porcelain & Granite

Buy a Felker TM-7 from now until the end of the year and save Felker TM-7 10" Porcelain Diamond Blade

Fast, chip-free cutting on porcelain tile, granite, quarry tile and dense floor tile.

Thin rim for precision cuts.

Super Premium quality. Wet cutting.

Porcelain blade with high performance and low price.

Thicker core than the MK Hot Dog Blade, means less flexing in the cut.

.060 Width

5/8" arbor

3034 MK-660 Wet Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > 13in to 19in Tile Saws

Free shipping from MK factory warehouse

Free 7" diamond blade, rip guide, & submersible water pump

Made in the USA
Rip cuts 14" tile. Diagonally cuts 10" x 10"
Ultra-quiet 3/4 HP direct drive DC motor with blade braking system
Variable height cutting head allows for plunge cutting and use of blades smaller than 7" in diameter.
Chrome guide-bar and linear-bearing assembly ensure precise alignment and precision cutting
Weighs 48 lbs
Lightweight aluminum cast components for rigidity and strength
One-piece reinforced zinc-plated steel frame with carrying handles
Hinged blade guard for easy blade changes and maintenance inspections
Removable thermoplastic water reservoir
One-year limited warranty

30351 MK-770EXP Wet Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > 20in to 25in Tile Saws

MK-770 EXP Tile Saw

Free shipping from MK warehouse to lower 48 states;
We will charge applicable sales tax for a factory direct drop-ship in the state of California
Free 7" Hot Dogâ„¢ porcelain blade
115V/60Hz, 1-1/4hp motor
20" rip cut capacity. 14" x 14" diagonal cuts
Weighs 33 lbs
Depth of cut: 2"
Depth of Cut at 45Â°: 1-1/8"
Dimensions: 33" x 19" x 20"
Powerful high-torque universal motor with maintenance-free, self-lubricating pinion and gear-box assembly
Tilting head allows for precise 45Âº miter cuts
Variable height cutting head allows for plunge cutting
Sliding aluminum die-cast cutting table
3/4" diameter chrome-plated linear guide-bar system
Single piece zinc-plated steel frame for rigidity, strength, and durability
Heavy duty on/off switch
Built-in water pump receptacle
Removable thermoplastic water reservoir
MK-Safeswitchâ„¢ prevents saw from being operated when locking key is removed
One-year limited warranty

30371K MK-101 PRO Wet Tile Saw W/Stand
Tile & Stone Tools > Tile Saws & Stone Saws > 20in to 25in Tile Saws

MK-101Pro Tile Wet Saw Series Features

Free shipping from MK factory warehouse to lower 48 states

We will charge applicable sales tax, for a factory direct drop-ship of the MK-101Pro Tile Wet Saw In the state of California

Free 10" MK-225 Hot Dog premium porcelain diamond blade, side extension table, water pump, stand w/ wheels, rip guide, large miter guide, dressing stone, adjustable protractor, and dual angle guide.

Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
Multi-position motor post and cutting head for convenient cutting of various tile sizes
Built-in water distribution system supplies water to both sides of blade
Variable height cutting head allows for plunge cuts and use of blades smaller than 10" in diameter
Accommodates 6"' and 8" profile wheels
One-year limited warranty

30110 Carriage Tray Wheels for Husqvarna, Target, & Felker Tile Saws - Tile & Stone Saw Accessories

2009-05-02T10:06:00.003-07:00

30110 Carriage Tray Wheels for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Carriage Tray Wheels for Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.

30111 5pcs Cutting Package, MK Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

5pcs Cutting Package, MK Tile Saws

MK-Diamond Cutting Kit for MK tile saws
Includes large miter, dual angle, adjustable protractor, extra large rip guide, dressing stone in a carrying case.

30112 On/Off Switch for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

On/Off Switch for Husqvarna, Target, & Felker Tile Saws

Replacement On/Off Switch for Husqvarna Tilematic TS 250X, Target TileMatic G2, & Felker Tilemaster Plus Tile Saw.
Try using a foot switch, when you have to replace your on/off switch often

30123 Water Tube Assembly for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Water Tube Assembly for Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.

3014 Felker FRS-38+ Rail Saw
Shop by Brand > Felker > Felker Stone & Tile Saws

Felker FRS-38 Plus Rail Saw Features.

Buy a FRS-38 and Save

FRS-38 was $1874.99 now only $1774.99 limited to quantity on hand

Free Shipping from Felker factory warehouse to a commercial address in the lower 48 states.
Free TM-10 Diamond blade
Marble and granite rail saw feature folding legs and wheels for easy for added job site mobility.
Adjustable locking plunge cut capabilities aid in cutting outlet and other openings.
38" rip cut, cuts 26" x 26" diagonally.
Depth of cut 2.6". Weight 154 lbs.
Powerful 1.5 hp motor, 110 Volts.
10" blade capacity, 5/8" arbor. 45 degree pivoting head.
New wheel kit, cutting table extension included.
Three-pieces cutting surface detaches from water tray for easy cleaning and access to the water pump.
Steel construction with powder coated finish to resist wear and corrosion.

30103 Dual 45 Angle Guide for Husqvarna, Target, & Felker Tile Saws - XL Plus Tile Saw.

2009-05-02T10:06:00.001-07:00

30103 Dual 45 Angle Guide for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Dual 45Â° Angle Guide Adjustable Protractor for Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.

30104 Adjustable Rip Guide for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Adjustable Rip Guide for Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.

30105 MK-270/370/470 Repl Pan
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK-270/370/470 Repl Pan

Fits MK 270, MK-370 & MK-470 tile saws
Does not fit MK-370exp

30106 MK-660/770/1080 Tile Saw Repl Pan
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK-660/770/1080 Tile Saw Repl Pan

Water Pan, fits MK-660, MK-770, MK-1080 tile saws

30108 MK-101 Tile Saw Water Pan
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK-101 Tile Saw Water Pan

Replacement Mk water pan.
Fits MK models: 100, 101, 101pro.

30098 Felker Tilemaster Tile Saw Repl Water Pan - Felker Tilemaster Tile Saw Water Pan With Rails.

2009-05-02T10:05:00.003-07:00

30098 Felker Tilemaster Tile Saw Repl Water Pan
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Felker Tilemaster Tile Saw Water Pan With Rails.

30099 Large Rip Guide for MK Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK Large Adjustable Rip Guide for MK tile saws

3010 Little Giant Tile Saw Pump for MK Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Little Giant Tile Saw Pump for MK Tile Saws

Spare water pump, with plastic water hose.
Original replacement pump for the MK 1.5 hp Tile saws.
Also fits the Dewalt D24000 Tile Saw
Made by Little Giant, 170 GPH.

30100 Bullnose Miter Guide for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

45 Bullnose Miter Guide for Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.

30102 Adjustable Protractor for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Adjustable Protractor for Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.

30092 Target & Felker Carriage Tray - Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

2009-05-02T10:05:00.001-07:00

30092 Target & Felker Carriage Tray
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Rolling Trolley for Target Tilematic, Felker Tilemaster.

Cutting table size is 16" x 10"

30094 45 Bullnose Miter Large, MK Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

45 Bullnose Miter Large, MK Wet Tile Saw

30095 Adjustable Protractor for MK Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Adjustable 90 degree protractors, fits all Mk tile saws.

30096 Dual 45 Flat Angle Guide for MK Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Fits MK wet tile saws.

30097 MK Tile Saw Adjustable Rip Guide
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK Adjustable Rip Guide for MK tile saws

3002 Felker Air Foot Switch - Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

2009-05-02T10:04:00.003-07:00

3002 Felker Air Foot Switch
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Felker Air Foot Switch

Now, a safer way to turn off your saw by foot, using a blast of air.
No need to worry about getting the foot switch wet.
Comes with 10ft of air hose.

3004 Felker Fence-Pro Tile Saw Guide
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Fence-Pro Features

Holds tile in place while cutting or profiling.
1/4" increment marks assist with slightly out of square cuts.
Eliminates the need for pre-marking off-the-table cuts.
Fence Pro is for Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.
For Husqvarna and 2008 Felker saws use item number 3005

3008 Tile Saw Stand for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Folding stand for Tile Saws.

Husqvarna Tilematic, TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.

3009 Cutting Pckg. for Husqvarna, Target, & Felker Tile Saws
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Cutting Package for Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.

Includes Miter Guide, Adjustable Protractor Guide, & Dual 45 Angle Guide

30091 Rubber Drain Plugs
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

For use with MK-Diamond, Target, Felker, Dewalt, and other wet tile saws

20052 Alpha AWP-158 Wet Polisher - Shop by Brand > Alpha > Alpha Wet Polishers

2009-05-02T10:04:00.001-07:00

20052 Alpha AWP-158 Wet Polisher
Shop by Brand > Alpha > Alpha Wet Polishers

Alpha AWP-158 Wet Polisher

Designed for polishing, shaping and light grinding.
Flexible rubber splash guard and caster assembly for extra stability while polishing flat areas.
Weight 6 lbs, 3000 Rpm, 115 Volts, 7.8 Amps.
Spindle thread 5/8"-11.
Ground fault interrupter included.
Includes water valve, hose, reversible handle,faucetgarden hose adapter, wrenches.
Powerful workhorse suitable for use in the shop or on the job site.
The AWP-158 features several improvements over previous generations of polishers.
In addition to the increased power and spindle speed, there are two types of handles included: a side handle for edge profiling and polishing and a â€œCâ€ handle for core drilling and flat surface polishing.
There is a flat polishing caster designed to improve stability during scratch removal operations for a better final finish.
The AWP-158 is double insulated and equipped with a power cord that is 10 feet long and has a built-in GFCI (Ground Fault Circuit Interrupter) for safety.
Also for safety and abrasive longevity, the polisher has a center water-feed and water supply with convenient garden hose attachment.
All these components are packed in a handy carrying case suitable for transporting and storing the AWP-158 and its accessories.
Designed to perform polishing and several other operations, the AWP-158 is suitable for use with the AlphaÂ® DS Style Shaping Wheel, the AlphaÂ® Profiler and AlphaÂ® Core Bits, as well as, the entire line of Ceramica polishing pads.
This is a must-have tool for all fabricators/installers of granite, marble, engineered stone and porcelain slab and all tile contractors.

20053 Alpha VSP-120 Variable Speed Wet Polisher
Shop by Brand > Alpha > Alpha Wet Polishers

Alpha VSP-120 Wet Variable Speed Polisher

The new VSP-120 comes with variable speed control switch with an automatic speed feed-back system to maintain consistent RPMs with or without a load.
This switch has also expanded the usable RPM range from 500 RPM to 2,800 RPM.
The new RPM range reduces heat build-up when polishing Engineered Stone, which eliminates burning or scorching the work piece.
AlphaÂ® has also added a Splash Guard that can be trimmed to adjust the height for the best comfort and protection.
Every stone fabricator should try the new VSP-120 variable speed wet polisher to achieve the best performance and high quality results.
For polishing, shaping and light grinding.
Designed especially to polish engineered stone which requires low RPMs.
Weight 7.3 lbs, Variable speed 500-2800 RPM, 115 V, 7 AMPS.
Spindle thread 5/8â€-11. Ground fault interrupter included.
Includes set of extra brushes, water valve, hose, reversible handle, faucetgarden hose adapter, wrenches.

2022 4in Alpha Quick Change Backer Pad for PVA
Shop by Brand > Alpha > Alpha Diamond Polishing Pads & Sandpaper

4" Alpha Quick Change Backer Pad for PVA

AlphaÂ® PVA Quick Change System is a low speed version of the original â€œMakitaÂ® styleâ€ PVA and is designed for use on an aluminum snail-lock backer plate specifically developed for low speed polishing tools

Necessary for attaching PVA quick change wheels to a low speed sander / polisher.
Max Rpm 4000.
The aluminum backer plate is attached to the polishing tool and each of the pads has a snail lock adapter.
The adapter simply fits into place and locks on with a twisting motion.
To remove the pads simply untwist and remove, then replace with the next grit.
This â€œQuick Changeâ€ process saves time & increases productivity
Marble shops, tile installers or anyone else that already has access to a low speed polishing tool will find that the AlphaÂ® PVA Quick Change system will speed up their productivity.

2031 6in x 2in QEP Margin Float
Tile & Stone Tools > Tile Grouting Tools > Grout Floats

6" x 2" QEP Margin Float

6" x 2" Margin float with a 1/8" gum rubber sole on lightweight foam pad.
Ideal for hard-to-reach areas such as kitchen backsplashes or under toe-kick.
Perfect for floors, walls and countertops wood handle, use with sanded and non-sanded grout.

2032 Diamond Hand Pad Polishing Kit
Shop by Brand > Abrasive Technologies

Diamond Hand Pad Polishing Kit

Our flexible diamond sheets come standard with hook and loop backing. Used with the heavy duty re-usable hand pad

Kit includes, 70, 120, 220, 400, 600, 800, 1800 & 3500 diamond grit polishing strips
The re-usable hand pad provides more control and less waste.
Ergonomically designed Hook and Loop backed hand-block
Diamond hand-pads works great on marble, granite, agglomerated stone, ceramics, glass and composites
Their ideal hand size allows for easy finishing to surface shapes and areas that are hard to reach with power tools
Not for use on polished flat surfaces
Hand block size is 2-1/4" x 4"

20012 Trelawny 1in Breaker Chisel - 1'' Trelawny Breaker Chisel

2009-05-02T10:03:00.003-07:00

20012 Trelawny 1in Breaker Chisel
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

1'' Trelawny Breaker Chisel

20013 Trelawny 2in Breaker Chisel
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

2'' Trelawny Breaker Chisel

20014 Trelawny 3in Breaker Chisel
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

Trelawny 3" Breaker Chisel

20015 Trelawny 4in Chisel Breaker
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

4" Chisel fits the Trelawny Breaker

2002 Trelawny Scraper Blade Holder
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

4" Scraper blade holder, for the Trelawny Pneumatic Long Reach or Python models.

Choose from 4", 8" or 12" sharp tempered steel blades.

164111 4in MK-250GX Continuous Dry/Wet Porcelain Blade - Tile & Stone Tools > Tile & Stone Diamond Blades

2009-05-02T10:03:00.001-07:00

164111 4in MK-250GX Continuous Dry/Wet Porcelain Blade
Tile & Stone Tools > Tile & Stone Diamond Blades > Dry Diamond Blades For Porcelain & Granite

4" MK-250GX Continuous Dry/Wet Porcelain Blade

Dry/Wet cutting, continuous rim diamond blade
Clean chip-free cutting on porcelain and granite.
7/8"-5/8" arbor
7mm rim height

2000 Trelawny 5' Pneumatic Long Reach Scraper
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

Trelawny 5' Pneumatic Long Reach Scraper

5' Long, for floors. Use chisel for removing concrete, floor tile,
vinyl tile etc.
Scraper blade available for vinyl floors, wall tile, thin set etc.
Weight 14 lbs. 2200 blows per minute.
Operates at 90 PSI. Air consumption 4.5 SCFM.
Only 1.5 HP compressor required.
4" chisel included. One year warranty.

2001 Trelawny 4in Chisel
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

4" Chisel for use with the Trelawny Long Reach, or the Python.

20010 Trelawny Python Pneumatic Scraper
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

Trelawny Python Pneumatic Scraper

Curved handle design is more comfortable to use.
2200 blows per minute, air consumption 6 CFM at 90 PSI.
2 HP compressor required.
5 ft. long, Weighs 18 lbs.
Use chisel for removing concrete, floor tile, marble etc.
Scraper blade available for vinyl floors, wall tile, thin set etc.

20011 Trelawny Long Reach Breaker
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

Trelawny Long Reach Breaker

Free 3" chisel
5ft long, weighs 30 lbs. For the removal of though ceramic, marble, granite, thinset or any difficult removal application.
The breaker can even fracture concrete slabs.
2" stroke combine with a 2" cylinder bore.
90 PSI, Air consumption 25 SCFM.

160509 MK 115V Electric Water Pump - Concrete & Masonry Tools > Concrete & Masonry Saws > Masonry Saw Accessories

2009-05-02T10:02:00.003-07:00

160509 MK 115V Electric Water Pump
Concrete & Masonry Tools > Concrete & Masonry Saws > Masonry Saw Accessories

115V Electric Water Pump for MK-5000 Series Electric Saws

160510 MK 220V Water Pump
Concrete & Masonry Tools > Concrete & Masonry Saws > Masonry Saw Accessories

220V Electric Water Pump for MK Brick & Block Saws

160970 4in MK-250GXT Turbo Dry Porcelain Blade
Tile & Stone Tools > Tile & Stone Diamond Blades > Dry Diamond Blades For Porcelain & Granite

4" MK-250GXT Turbo Dry Porcelain Blade

Dry cutting, turbo rim diamond blade.
Clean chip-free cutting on porcelain and granite.
7/8"-5/8" arbor
7mm rim height

162075 MK-100, MK-101, MK-1070 Side Extension Table
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Side Extension Table for MK-100 series, MK-101 series & MK-1070 wet tile saws.

162675 MK Manta IV Core Drill Rig
Shop by Brand > MK Diamond > MK Core Drills & Bits

MK Manta IV Core Drill Rig

Free shipping to a commercial address in the continental US Technical Information

Motor: 2-1/2 hp, 110 V, 18 Amp electric motor
No Load Speed: 700 RPM
Motor Spindle: 1-1/4" UNC
Drilling Capacity: 6"
Carriage Travel: 21"
LxWxH: 15" x 9-1/2" x 34"
Weight: 30.5 lb

General Information

For wet cutting of concrete, stone and masonry
6" maximum bit capacity
Thermal overload protection
Anchor base for vertical and horizontal drilling
Four base leveling screws for precise drill alignment
Single lever "slip-through" feed handle
Integrated water feed with flow valve and quick disconnect hose fitting

159253 MK Core Drill Stand - Shop by Brand > MK Diamond > MK Core Drills & Bits

2009-05-02T10:02:00.001-07:00

159253 MK Core Drill Stand
Shop by Brand > MK Diamond > MK Core Drills & Bits

MK Core Drill Stand

MK Core Drill fits MK-130/3P wet hand held core drills and hand held core drills with 60mm motor mount
MK-2000P wet hand held core drills and MK-1300 & MK-2000 dry hand held core drills require adapter sleeve for 53 mm motor mount

Technical Information

Max Bit Capacity: 6"
Dimensions: 9"W x 15.5" L x 30.5"H
27" usable carriage travel
Weight: 21 lbs

159346 MK-CX-3 6hp Robin Walk-Behind Concrete Saw
Concrete & Masonry Tools > Concrete & Masonry Saws > Push Walk-Behind Concrete Saws

MK-CX-3

Free shipping from MK factory warehouse
Free 12" MK-CX-10 Diamond Blade
6 HP Robin engine
Depth of cut with 14" blade is 5-1/2"
Compact, lightweight, engineered for maneuverability and reliability
Can be used for wet or dry cutting
Aluminum frame construction
Cast-aluminum hinged blade guard
Built-in water distribution system supplies water to both sides of blade
Blade guard mounts on either left- or right-hand side of saw and cuts within 1" of wall or curb
Sturdy single piece steel motor mount weldment to minimize vibration
1" diameter blade shaft with self aligning bearings
Folding handle bar for compact transport
Poly V-belt
Tachometer on Honda Engine

8% sales tax on orders shipped to residence of CA

159870 Side Table for MK-212 Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Side table for MK-212 Wet tile saw

160294 MK-333JB 10in Porcelain Diamond Blade
Tile & Stone Tools > Tile & Stone Diamond Blades > Wet Diamond Blades For Porcelain & Granite

MK-333JB 10" Porcelain Diamond Blade

Standard grade wet only, thin-rim blade for porcelain & vitreous tile
The MK-333JB blade has tension slots to prevent dishing & blade wobble
5/8" standard arbor
.060 Width, Rim height 8mm

160488 MK-370EXP, MK-770EXP Extension Side Table
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Side Table Extension for MK-370EXP & MK-770EXP Wet Tile Saws.

156426 MK ATS Saw Stand - Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

2009-05-02T10:01:00.003-07:00

156426 MK ATS Saw Stand
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Mk ATS Saw Stand

Versatile and highly mobile saw stand with zinc-plated square steel tubing
10" pneumatic tires, and removable side table
Tile saw not included.

158365 MK-2000P 2-Speed Hand Held Wet Core Drill
Shop by Brand > MK Diamond > MK Core Drills & Bits

MK-2000P 2-Speed Hand Held Wet Core Drill

General Information

Slip clutch
Thermal overload switch
Electronic torque limitation and speed control
Built-in water swivel
Ground Fault Interrupter
Metal carrying case
5/8" x 11 UNC and 1-1/4" x 7 UNC connecting threads

158366 MK-1300 1-Speed Hand Held Dry Core Drill
Shop by Brand > MK Diamond > MK Core Drills & Bits

Compact and lightweight, this single-speed, shock-free drill can be used to create accurate openings up to 3-1/4" in brick, limestone, cinder blocks and other abrasive materials.

Dry drilling only.

A slip clutch protects the operator in case of jamming.

The MK-1300 is supplied in a metal carrying case.

158367 MK-2000 2-Speed Hand Held Dry Core Drill
Shop by Brand > MK Diamond > MK Core Drills & Bits

The MK-2000 is a powerful dry diamond core drill for shock-free drilling in brick and other abrasive materials.

This professional tool is suited to create wall and ceiling orifices up to 5-1/4" in diameter.

Electronic torque limitation and speed control guarantee constant Rpm even under load.

MK-2000 Features

Mechanical safety clutch
Acoustic overload indicator
Electronic torque limitation and speed control
Metal gearbox housing
Maintenance-free double-speed gearbox
Metal carrying case

158368 MK-130/3 3-Speed Hand Held Wet Core Drill
Shop by Brand > MK Diamond > MK Core Drills & Bits

MK-130/3 3-Speed Hand Held Wet Core Drill

General Information

The MK-130/3 is a fast, efficient drilling system. Use it hand-held for up to 3" diameter and/or rig-mounted for up to 6" diameter core bit.

The MK-130/3 combines a robust all aluminum housing with a compact size and powerful 17 Amp motor. The heavy-duty design and power reserve make it suitable for continuous use. The mechanical 3-speed gearbox allows the operator to select the best speed for the core bit diameter. The result is optimum drilling and longer tool life.

The MK-130/3 includes a built-in leveling bubble, safety slip clutch, carrying case, water swivel, thermal overload signal and Ground Fault Circuit Interrupter.

151330 32in MK Stone Saw Stands - Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

2009-05-02T10:01:00.001-07:00

151330 32in MK Stone Saw Stands
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

32" MK Stone Saw Stands

151348 MK Stone Saw 32inx20in Side Table
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK Stone Saw 32"x20" Side Table

151349 MK Stone Saw 60inx20in Side Table
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK Stone Saw 60"x20" Side table

151991 MK-101 Wet Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > 20in to 25in Tile Saws

MK-101 Features

Free shipping from MK factory warehouse to lower 48 states

Free 10" MK diamond blade, Water Pump, Rip Guide, 45Âº Bullnose Miter

Fully enclosed high torque, fan-cooled motor
Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
Multi-position motor post and cutting head for convenient cutting of various tile sizes
Built-in water distribution system supplies water to both sides of blade
Variable height cutting head allows for plunge cuts and use of blades smaller than 10" in diameter
Accommodates 6" and 8" profile wheels
Micro V-belt drive
Blade shaft lock for easy blade removal
Linear-bearing and chrome plated guide-bar assembly ensure precise cutting
Cast aluminum blade guard and motor post
One-piece reinforced zinc-plated steel frame
One-year limited warranty

153262 Water Pan for MK-101PRO 24 & MK-1070
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Water Pan for MK-101PRO 24 & MK-1070 Wet Tile Saws

Drain plug included

130156 Diteq Vacuum plate assembly - Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

2009-05-02T10:00:00.001-07:00

130156 Diteq Vacuum plate assembly
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Vacuum plate assembly

Fits Teq-Track saw.

134684 Blade Wrench for Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Universal Blade Wrench for Tile Saw

Nut wrench for blade removal.
For Nut, 5/8-18 Hex
Fits Husqvarna, Target, Felker, Dewalt and MK saws

1363299 2ft Long Reach Scaller
Tile & Stone Tools > More Tile & Stone Tools > Tile Removal (Scalers, Scrapers)

2ft long for walls, small areas

Use chisel for removing concrete, floor tile, vinyl tile etc.
Sharp scraper blade available for vinyl floors, wall tile, thin set etc.
Weight 7 lbs. 2200 blows per minute.
Operates at 90 PSI. Air consumption 4.5 SCFM.
Only 1.5 HP compressor required.
4" chisel included. One year warranty.

150741 MK Tile Saw 24in Tile Cutting Kit
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK Tile Saw 24in Tile Cutting Kit

Zinc-plated support fixture that permits 24" straight rip cutting.
For MK-101 & MK-100 only.

151329 MK Stone Saw 50in Stand
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

MK Stone Saw 50" Stand

1088 Crown Mortar Mixer Highway Towing Package - Shop by Brand > Crown > Crown Mortar Mixers

2009-05-02T09:58:00.003-07:00

1088 Crown Mortar Mixer Highway Towing Package
Shop by Brand > Crown > Crown Mortar Mixers

Crown Mortar Mixer Highway Towing Package for the 4S and 6S

1107 Crown Concrete Screed King
Shop by Brand > Crown > Crown Screed King Concrete Screeds

Screed King Honda 4-Stroke GX35

75% less vibration to operators hands.
No tools required to remove screeds bars
5.5" base allow the screed to float in any slump of concrete.
Unique curl edge helps to roll the excess concrete back to the rackers and allows the screed to float or ride on forms.
No brackets or adjustable torsion rods mean no crevices for concrete to gather-in, making clean-up a breeze.
Adjustable handlebars can accommodate any user height in any depth of concrete.
Honda 4-strokes engine is isolated from vibration with rubber mounts.
No flex shaft to lubricate, oversize bearing system is factory sealed.
Clamp-on mounting system allows the power head to be offset to work under protrusions
Screed King delivers high frequency vibration that eliminates the honeycomb effect and speeds finish time.
Power unit only, bar not included

1139 Superior A Repl. Handle
Tile & Stone Tools > Tile Cutters & Nippers > Cutting Wheels & Parts

Original replacement handle for the Superior Tile Cutter.

118/3 7/8in Tomecanic Tungsten Carbide Repl Wheel
Customer Service > Wholesale

Temporarily out of stock until end of February 118/3 7/8" Tomecanic Tungsten Carbide Repl Wheel

7/8" wheel fits Super Cut 2000 series tile cutters
22 Dia x 6 Inside Dia x 5 mm Thick.

1193968 Imer Mini Mix 60 Repl. Bucket
Concrete & Masonry Tools > Concrete & Mortar Mixers > Mixer & Buggy Accessories

4 handle new style bucket.

1070 Hydra Scrubbing Sponge - Tile & Stone Tools > More Tile & Stone Tools > Hand Sponges

2009-05-02T09:58:00.001-07:00

1070 Hydra Scrubbing Sponge
Tile & Stone Tools > More Tile & Stone Tools > Hand Sponges

Hydra Scrubbing Sponge

6-5/8" x 4-1/4" x 2-1/4".
A Hydra tile grout sponge on one side and a scrubbing sponge on the other.
Wipe off tile grout or remove grout haze.

1083 Fine Barwalt Precision Scrub Pads White
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Fine Barwalt Precision Scrub Pads White

Repl. white pad for scrub pads kit
Size 10" x 4-5/8" x 1"
Non abrasive for use on highly glazed wall tile, will not scratch surface

10831 Coarse Barwalt Precision Scrub Pad Blue
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Coarse Barwalt Precision Scrub Pad Blue

Repl. blue pad for scrub pads kit
Size 10" x 4-5/8" x 1"
Abrasive for use on tough jobs. Will quickly cut through epoxy grout

1084 Barwalt Precision Scrub Pads W/ Handle
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

Scrub Pads Kit W/ Handle

Kit of two pads (blue & white) with one removable handle
Size 10" x 4-5/8" x 1"
Blue, coarse - Abrasive for use on tough jobs. Will quickly cut through epoxy grout.
White, Fine - Non abrasive for use on highly glazed wall tile. Will not scratch surface.

1087 Crown Mortar Mixer Blade Upgrade
Shop by Brand > Crown > Crown Mortar Mixers

Crown Spiral Mixing Blade Upgrade

Works like a spiral conveyor, rapidly moving material across the drum, providing a faster thorough mixture.
30% faster mix
Less splash, reduce clean-up and increase capacity
No contact with the drum, reduce drum wear
Perfect for color additives and dry mixes
Only available for steel drums mixers

1066 XL Hydro Sponge - Customer Service > Quantity Pricing

2009-05-02T09:57:00.003-07:00

1066 XL Hydro Sponge
Customer Service > Quantity Pricing

XL Hydro Sponge

Extra large fine pore hydrophilic sponge.
Soft & durable, excellent for removing excess grout, rinse clean.
Extra Large fine pore. 7-1/2"x 5-1/4"x 2".
Rounded edges to prevent â€œdigging outâ€ or marring of grout.
Only $1.09 Each, 450 pcs bale quantity $490.50
Imported from Greece.
Use a clean grout float to remove any excess grout from floor.
Allow up to 15 minutes for the grout to set and then proceed to wipe floor clean.
Keep a clean bucket of water available and replace as necessary. Take a damp sponge and place flush on tile at an angle to tile joints. Pull sponge down and towards you. Be careful not to dig the grout mortar out of the joints.
Flip sponge over and repeat making sure to overlap the adjacent area you have just wiped. Then rinse sponge thoroughly and repeat process. Some areas may need to be wiped more than once.

1067 Hydra XL Tile Grout Sponge
Customer Service > Quantity Pricing

Hydra XL Tile Grout Sponge

7-1/2"x 5-1/4"x 2-3/8".
This Hydrophilic sponge is denser and more durable than similar imported sponges.
Made by Hydra in the USA.
Rounded edges to prevent â€œdigging outâ€ or marring of grout.
Excellent for removing excess grout, rince clean, the closest to a natural sponge.
HYDRA SPONGES are the best polyester sponges on the market.
They are Hydrophilic an extra manufacturing process gives these sponges tremendous water-holding capacity, more than any other polyester sponge!
The HYDRA SPONGE is the preferred washing sponge by professionals.
They are more durable than any other polyester sponge and more cost saving than any natural sponge.
They wash out clean, dry soft and are always uniform in size and quality..
Quantity discount 50, 100, 450 pcs.

10671 Hydra XL 100 Mini-Bale
Tile & Stone Tools > More Tile & Stone Tools > Hand Sponges

Hydra XL 100 Mini-Bale

7-1/2"x 5-1/4"x 2-3/8" 100 Mini-Bale.
This Hydrophilic sponge is denser and more durable than similar imported sponges.
Made by Hydra in the USA.
Rounded edges to prevent â€œdigging outâ€ or marring of grout.
Excellent for removing excess grout, rinse clean, the closest to a natural sponge.
HYDRA SPONGES are the best polyester sponges on the market.
They are Hydrophilic an extra manufacturing process gives these sponges tremendous water-holding capacity, more than any other polyester sponge!
The HYDRA SPONGE is the preferred washing sponge by professionals.
They are more durable than any other polyester sponge and more cost saving than any natural sponge.
They wash out clean, dry soft and are always uniform in size and quality.

1069 Hydra Medium Grout Sponge
Customer Service > Quantity Pricing

Hydra Medium Grout Sponge

Size 6-1/4"x4"x2".
This Hydrophilic sponge is denser and more durable than other imported similar sponge.
Made by Hydra in the USA.
Rounded edges to prevent â€œdigging outâ€ or marring of grout.
Excellent for removing excess grout, rince clean, the closest to a natural sponge.
HYDRA SPONGES are the best polyester sponges on the market.
They are Hydrophilic and extra manufacturing process gives these sponges tremendous water-holding capacity, more than any other polyester sponge!
The HYDRA SPONGE is the preferred washing sponge by professionals.
They are more durable than any other polyester sponge and more cost saving than any natural sponge.
They wash out clean, dry soft and are always uniform in size and quality.
Quantity discount 50, 100, 450 pcs.

10691 Hydra Medium 100 Mini-Bale
Tile & Stone Tools > More Tile & Stone Tools > Hand Sponges

Hydra Medium 100 Mini-Bale

100 Pcs Mini Bale. 6-1/4"x4"x2".
7-1/2"x 5-1/4"x 2-3/8" 100 Mini-Bale.
This Hydrophilic sponge is denser and more durable than similar imported sponges.
Made by Hydra in the USA.
Excellent for removing excess grout, rinse clean, the closest to a natural sponge.
HYDRA SPONGES are the best polyester sponges on the market.
They are Hydrophiliated extra manufacturing process gives these sponges tremendous water-holding capacity, more than any other polyester sponge!
The HYDRA SPONGE is the preferred washing sponge by professionals.
They are more durable than any other polyester sponge and more cost saving than any natural sponge.
They wash out clean, dry soft and are always uniform in size and quality.

1062 Marshalltown Pool Trowel - Tile & Stone Tools > More Tile & Stone Tools > Trowels

2009-05-02T09:57:00.001-07:00

1062 Marshalltown Pool Trowel
Tile & Stone Tools > More Tile & Stone Tools > Trowels

Marshalltown Pool Trowel

Spring steel blade with DuraSoft handle.
Size is 16"x4-1/2", ends are fully rounded.

1062B Groove Grommet(Orange) for Gemini Revolution Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Groove Grommet (Orange) for Gemini Revolution Tile Saw.

Sold individually.

1063 Marshalltown Tile Setter's Trowel
Tile & Stone Tools > More Tile & Stone Tools > Trowels

Marshalltown Tile Setter's Trowel

Forged from a single piece of high grade steel.
Size 7"x 4-3/8" best quality buttering tool available.

1065 Professional Carbide Grout Saw
Tile & Stone Tools > Tile Grouting Tools > Grout Removal Tools

Professional Carbide Grout Saw

For stripping, cleaning and removing old grout.
Equipped with: 1 carbide grit-edge and 1 steel tooth blade
Use 2 blades for floor grout removal, 1 blade for walls.

1065A Grommet Assembly Kit W/ Belt for Gemini Revolution
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Gemini Revolution Grommet pulley assembly kit w/ kevlar belt

Includes:

Kevlar Belt

Qty. 7 orange pulleys

Qty. 4 blue pulleys

Qty. 2 red pulleys

Qty. 2 green pulleys

Only for old style Gemini Revolution tile saws

1055 Barwalt Cross Blade Mixer - Shop by Brand > Barwalt > Barwalt Mixing Paddles

2009-05-02T09:56:00.003-07:00

1055 Barwalt Cross Blade Mixer
Shop by Brand > Barwalt > Barwalt Mixing Paddles

Cross Blade Mixer

Barwalt Cross Blade Mixer.
28" Hex Shaft keeps the drill from slipping.
6" blade diameter.

1056 Barwalt Mud Beater Mixer
Shop by Brand > Barwalt > Barwalt Mixing Paddles

Barwalt Mud Beater Mixer

The best mixer ever made!
The mud beater can be used to mix all thinset, mortar, grout & concrete.
Unique designs minimize air entrapment for greater compressive strength of mortars.
Long 30" hex shaft, 5" paddle diameter.
Cheater Beater mixer blade.
Plated finish.

1058 Marshalltown Spiral Mixers
Tile & Stone Tools > Grout Mixers > Mixing Paddles

Marshalltown Spiral Mixers

Marshalltown spiral mixers.
4" Diameter 24" long shaft.
Works best at 500-900 Rpm.

1059 Barwalt EZ-Mixer
Shop by Brand > Barwalt > Barwalt Mixing Paddles

Barwalt EZ-Mixer

For mixing grouts, thinset, mortar, etc.
Patented design minimizes air entrapment for greater compressive strength of mortars.
30" hex shaft 5" blade Diameter.

1060 Double Bearing Pulley(Blue) for Gemini Revolution Tile Saw
Tile & Stone Tools > Tile Saws & Stone Saws > Tile & Stone Saw Accessories

Double Bearing Pulley (Blue) for Gemini Revolution Tile Saw.

Sold individually.

1041 Barwalt KN-1 Knee Pads - Shop by Brand > Barwalt > Barwalt Kneepads

2009-05-02T09:56:00.001-07:00

1041 Barwalt KN-1 Knee Pads
Shop by Brand > Barwalt > Barwalt Kneepads

Barwalt KN-1 Knee Pads

Waterproof non-skid knee pads.
Easy on your work surface.
Two gum rubber straps and foam liner inside.
Weigh only 10 ounces each.
High-density, shock-absorbing foam inner pads
Non-skid outer shell molds itself to floor surfaces for maximum grip and security

1042 Barwalt KN-3 Knee Pads
Shop by Brand > Barwalt > Barwalt Kneepads

Barwalt KN-3 Knee Pads

The Barwalt Ultralight KN-3 hard cap knee pad offers a smooth hard shell exterior with a flat kneeling surface for greater comfort and extra protection against cutting and caustic surfaces.
The hard caps are ultrasonically heat staked, eliminating the use of rivets which can cause scratching on sensitive work surfaces.

1044 Knee Pro Ultra Flex III Knee Pads
Tile & Stone Tools > More Tile & Stone Tools > Kneepads & Gloves

Hard plastic outer shells are extremely strong.

Hinged for ease of movement while kneeling, or working.

1/2" closed cell inner foam pad.

Non marking Grip-strip on any surface

1046 Repl Pads for Knee Pro Ultra Flex II Knee Pads
Tile & Stone Tools > More Tile & Stone Tools > Kneepads & Gloves

Repl Pads for Knee Pro Ultra Flex II Knee Pads

1054 QEP Spacer Puller
Tile & Stone Tools > More Tile & Stone Tools > Spacers & Wedges

Remove Spacer fast

10212 7/8in Thin Ball Bearing Carbide Repl Wheel - Carbide scoring cutter.

2009-05-02T09:55:00.003-07:00

10212 7/8in Thin Ball Bearing Carbide Repl Wheel
Tile & Stone Tools > Tile Cutters & Nippers > Cutting Wheels & Parts

New Big Clinker Replacement thin Ball Bearing scoring wheel, 7/8" (22mm).

1024 Carbide Scoring Cutter
Tile & Stone Tools > More Tile & Stone Tools > Other Tile & Stone Tools

Carbide scoring cutter.

Use to score and break backerboard.

1030 QEP Margin Trowel
Tile & Stone Tools > More Tile & Stone Tools > Trowels

QEP Margin Trowel

QEP Economy 5"x2" margin trowel w/ wood handle

1039 4in Suction Cup
Shop by Brand > Barwalt > Other Barwalt Tiling Tools

4" Suction Cup

4" suction cup to remove or lift large tile. Holds 50 lbs
Suction cupâ€™s load capacity decreases when used on rough surfaces.

1040 Raimondi Medusa 4" Suction Cup
Tile & Stone Tools > More Tile & Stone Tools > Other Tile & Stone Tools

Raimondi 4" Suction Cup

Ergonomic grip with lever for one handed use
Heavy duty certified to lift 88 lbs / 40kg, )on clean and smooth surfaces.)
Suction cupâ€™s load capacity decreases when used on rough surfaces.

1015 Rubi TM 70 28in Professional Tile Cutter - Tile & Stone Tools > Tile Cutters & Nippers > Tile Cutters

2009-05-02T09:55:00.001-07:00

1015 Rubi TM 70 28in Professional Tile Cutter
Tile & Stone Tools > Tile Cutters & Nippers > Tile Cutters

Rubi TM-70

Free 10mm & 18mm cutting wheels
28" rip cut, 20" diagonally
High performance single point breaker, adjustable from 1/4" to 7/8"
2200 lbs of breaking power
Chromed and rectified steel guides, with anti-corrosion treatment.
Lateral Stop for straight and 45Âº Repeated Cutting.
Base outrigger supports for large format tile.
New greater resistance transport case.
Scoring Wheel included: Ã˜ 5/16â€ (8mm.).
Direct vision of the scoring and cutting line.
8 mm. to 22 mm. adaptable and interchangeable scoring wheels.

10192 Tomecanic Floor Float & 5ft Handle
Customer Service > Wholesale

Tomecanic Floor Float & 5ft Handle

Buy a Tomecanic stand-up floor float from now until the end of September and save

Tomecanic stand-up floor float was $36.99 now only $28.99

Float the grout into the joints, with the rubber and foam flexible blades.

5 ft. hard wood Handle included.

Grout standing-up, saves your knees.

25-3/4" wide work faster!

1020 1/2in Original Superior Repl. Wheel
Tile & Stone Tools > Tile Cutters & Nippers > Cutting Wheels & Parts

1/2" Original Superior Repl. Wheel

1/2" Carbide original replacement wheel.
Fits all Superior Tile Cutter models.
ST051 #200 Wheel

1021 Brutus Tile Cutter Repl Wheel
Tile & Stone Tools > Tile Cutters & Nippers > Cutting Wheels & Parts

Brutus Tile Cutter Repl Wheel

7/8" dia. Fits Brutus Tile Cutters.
Bolt & nut included.

10211 7/8in Wheel for Big Clinker
Tile & Stone Tools > Tile Cutters & Nippers > Cutting Wheels & Parts

7/8" Wheel for older models, Big Clinker

Wider than newer models

10006 Multiquip MVH120GH Mikasa Reversible Plate Compactor - Hydraulic oil tank

2009-05-02T09:54:00.001-07:00

10006 Multiquip MVH120GH Mikasa Reversible Plate Compactor
Concrete & Masonry Tools > Compaction Equipment > Reversible Plate Compactors

Multiquip MVH120GH Mikasa Reversible Plate Compactor

This plate is extremely maneuverable making it the logical choice for work in tight, confined areas.

Engine protection with top cover keeps dirt off engine
Highly maneuverable
Ideal for tight, confined areas
Self-cleaning plate
Honda engine

5,200 lbs centrifugal force Water Tank Not Available With This Model

Multiquip	MVH120
Plate Size WxL	15.7 in.x23 in.
Centrifugal Force	5,200 lbs
Exciter Speed	6000 rpm
Forward Speed	75 ft./min
Engine	Honda GX-160
Motor	5.5 hp
Weight	247 lbs

10007 Multiquip MVH502DSB2 Mikasa Reversible Plate Compactor
Concrete & Masonry Tools > Compaction Equipment > Reversible Plate Compactors

Multiquip MVH502DSB2 Mikasa Reversible Plate Compactor

Ideal for the bigger jobs that require greater compaction force.

14,000 lbs. compaction force for high productivity
Extension plates provide versatility for various applications
14,000 pounds (6,350 kg) of compaction force
Handle folds for easy transport, storage
Adjustable handle height, fan integrated with the clutch pulley
Standard plate size: 27.5 x 35.5 inches (700 x 900 mm)
Anti - Vibration Handle System (AVS)
Powered by dependable Hatz 14.3 hp engine
Electric start with hand-crank backup

Hydraulic oil tank

Multiquip Mikasa	MVH502DSB2
Plate Size WxL	22 in.x35 in.
Centrifugal Force	14,000 lbs
Size Extension WxL	28 in.x35 in.
Exciter Speed	4,200 rpm
Forward Speed	75 ft./min
Engine	Hatz 1D81S
Motor	14.3 hp
Weight	1,122 lbs

10017 Multiquip CMD1H Core Drill
Concrete & Masonry Tools > Core Drill Equipment > Handheld Core Drills

Multiquip CMD1H Core Drill

Features:

Convenient adjustable shoulder rest
Three-position hand grip
Internal water feed
Internal slip clutch
Carrying case and tools included
External circuit breaker
1800 Rpm
Weighs only 9 lbs

10020 Makita HR1830F Variable Speed Rotary Hammer with L.E.D. Light
Concrete & Masonry Tools > Hammer Drills & Demolition Hammers > Hammer Drills

Makita HR1830F Features

Dual operation mode; rotation only and hammering with rotation
Variable speed (0-1,500 Rpm) and (0-5,000 BPM) for demanding applications
No hammering when idling function ensures extra-low vibration under no load
L.E.D. light illuminates drilling surface for more accurate work.
Soft-grip side handle with elastomer for better comfort
Ideal for overhead applications and working in confined areas
Carbon brushes for extended service life
Ergonomic and well-balanced design (3.7 lbs.)
Recessed lock-on button for continuous use

10131 Rubi Drill Attachment for TS-40, TS-20, TS-30, TS-60
Tile & Stone Tools > Tile Cutters & Nippers > Cutting Wheels & Parts

Rubi Drill Attachment for TS-40, TS-20, TS-30, TS-60

Buy Rubi Drill Attachment and Save
TS-20, TS-30, TS-40, TS-60 Drill Attachment
Use on wall tile, 1" carbide bit included.