Concrete Saw, Wet Saw, Tile Cutter, Cement Mixers

20052 Alpha AWP-158 Wet Polisher
Shop by Brand > Alpha > Alpha Wet Polishers

Alpha AWP-158 Wet Polisher

• Designed for polishing, shaping and light grinding.
• Flexible rubber splash guard and caster assembly for extra stability while polishing flat areas.
• Weight 6 lbs, 3000 Rpm, 115 Volts, 7.8 Amps.
• Spindle thread 5/8"-11.
• Ground fault interrupter included.
• Includes water valve, hose, reversible handle,faucetgarden hose adapter, wrenches.
• Powerful workhorse suitable for use in the shop or on the job site.
• The AWP-158 features several improvements over previous generations of polishers.
• In addition to the increased power and spindle speed, there are two types of handles included: a side handle for edge profiling and polishing and a “C” handle for core drilling and flat surface polishing.
• There is a flat polishing caster designed to improve stability during scratch removal operations for a better final finish.
• The AWP-158 is double insulated and equipped with a power cord that is 10 feet long and has a built-in GFCI (Ground Fault Circuit Interrupter) for safety.
• Also for safety and abrasive longevity, the polisher has a center water-feed and water supply with convenient garden hose attachment.
• All these components are packed in a handy carrying case suitable for transporting and storing the AWP-158 and its accessories.
• Designed to perform polishing and several other operations, the AWP-158 is suitable for use with the Alpha® DS Style Shaping Wheel, the Alpha® Profiler and Alpha® Core Bits, as well as, the entire line of Ceramica polishing pads.
• This is a must-have tool for all fabricators/installers of granite, marble, engineered stone and porcelain slab and all tile contractors.

20053 Alpha VSP-120 Variable Speed Wet Polisher
Shop by Brand > Alpha > Alpha Wet Polishers

Alpha VSP-120 Wet Variable Speed Polisher

• The new VSP-120 comes with variable speed control switch with an automatic speed feed-back system to maintain consistent RPMs with or without a load.
• This switch has also expanded the usable RPM range from 500 RPM to 2,800 RPM.
• The new RPM range reduces heat build-up when polishing Engineered Stone, which eliminates burning or scorching the work piece.
• Alpha® has also added a Splash Guard that can be trimmed to adjust the height for the best comfort and protection.
• Every stone fabricator should try the new VSP-120 variable speed wet polisher to achieve the best performance and high quality results.
• For polishing, shaping and light grinding.
• Designed especially to polish engineered stone which requires low RPMs.
• Weight 7.3 lbs, Variable speed 500-2800 RPM, 115 V, 7 AMPS.
• Spindle thread 5/8”-11. Ground fault interrupter included.
• Includes set of extra brushes, water valve, hose, reversible handle, faucetgarden hose adapter, wrenches.

2022 4in Alpha Quick Change Backer Pad for PVA
Shop by Brand > Alpha > Alpha Diamond Polishing Pads & Sandpaper

4" Alpha Quick Change Backer Pad for PVA

Alpha® PVA Quick Change System is a low speed version of the original “Makita® style” PVA and is designed for use on an aluminum snail-lock backer plate specifically developed for low speed polishing tools

• Necessary for attaching PVA quick change wheels to a low speed sander / polisher.
• Max Rpm 4000.
• The aluminum backer plate is attached to the polishing tool and each of the pads has a snail lock adapter.
• The adapter simply fits into place and locks on with a twisting motion.
• To remove the pads simply untwist and remove, then replace with the next grit.
• This “Quick Change” process saves time & increases productivity
• Marble shops, tile installers or anyone else that already has access to a low speed polishing tool will find that the Alpha® PVA Quick Change system will speed up their productivity.

2031 6in x 2in QEP Margin Float
Tile & Stone Tools > Tile Grouting Tools > Grout Floats

6" x 2" QEP Margin Float

• 6" x 2" Margin float with a 1/8" gum rubber sole on lightweight foam pad.
• Ideal for hard-to-reach areas such as kitchen backsplashes or under toe-kick.
• Perfect for floors, walls and countertops wood handle, use with sanded and non-sanded grout.

2032 Diamond Hand Pad Polishing Kit
Shop by Brand > Abrasive Technologies

Diamond Hand Pad Polishing Kit

Our flexible diamond sheets come standard with hook and loop backing. Used with the heavy duty re-usable hand pad

• Kit includes, 70, 120, 220, 400, 600, 800, 1800 & 3500 diamond grit polishing strips
• The re-usable hand pad provides more control and less waste.
• Ergonomically designed Hook and Loop backed hand-block
• Diamond hand-pads works great on marble, granite, agglomerated stone, ceramics, glass and composites
• Their ideal hand size allows for easy finishing to surface shapes and areas that are hard to reach with power tools
• Not for use on polished flat surfaces
• Hand block size is 2-1/4" x 4"

Description

concrete saw, concrete saw blades, tile saw, cement mixers, tile cutter, concrete cutting, concrete mixers, hammer drills, surface grinders, toe kick saw, jamb saws, granite polishing tools

 

 

 

Tags ImagensMix.com

adobe AdSense archives articles atom audio barack-obama Blog business Como Se Llama customizable daily Downloads eBooks engine entry generator Google image include-data Joomla Linkts loop-values Made Easy Make Money making-money marketing microsoft money Movies MRR news optimization Photoshop Planet BR plr Premium Wordpress Search Seo Tools social templates theme themes tools traffic user videos WHOLESALE Windows Vista Wordpress Themes